Model #LSQ9210HZ0 WHIRLPOOL Residential Washers

  • Top And Cabinet/literature
    3 Results
  • Control And Rear Panel
    3 Results
  • Agitator, Basket, And Tub
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness
    3 Results
  • Water System
    3 Results
  • Brake And Drive Tube
    3 Results
  • Gearcase
    3 Results
  • Miscellaneous/optional
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How do I rremove the pump from the motor? LSQ9210HZ0 Whirlpool Automatic washer

A:

Thank you for choosing sears I would be happy to help you with your washer. Upon researching model LSQ9210HZ0;  unplug the washer power cord before attempting repair or taking unit apart. Once you access the pump, you must remove the clips on the pump securing it to the motor. The clips can be pried off with a flat head screw driver and  turn the upper clip to a 90° degree motion to allow the pump to come off, now you can pull the pump off.


I trust that this information will help you, thank you have a great day.

Read More
CarlosZ -
Sears Technician
May 07, 2015
Q:

Whirlpool Clothes Washer Basket Rotation Model LSQ9210HZ0

A:

Good morning... I can fully understand your curiosity regarding this topic. It sounds like your washer is working properly. Are you having any actual issues with it? I will forward your question to an expert who will investigate the matter further and get back to you. You will hear from them within two business days if not sooner. Until you hear from us, have a nice day.

Read More
Henry -
December 27, 2012
A:

I can understand how important it is to have the right information for your washer. During the wash cycle, the outer tub is filled with water sufficient to fully immerse and suspend the clothing freely in the basket. The movement of the agitator pushes water outward between the paddles towards the edge of the tub. The water then moves outward, up the sides of the basket, towards the center, and then down towards the agitator to repeat the process, in a circulation pattern similar to the shape of a torus. The agitator direction is periodically reversed, because continuous motion in one direction would just lead to the water spinning around the basket with the agitator rather than the water being pumped in the torus-shaped motion. Some washers supplement the water-pumping action of the agitator with a large rotating screw on the shaft above the agitator, to help move water downwards in the center of the basket. In most top-loading washers, if the motor spins in one direction, the gearbox drives the agitator; if the motor spins the other way, the gearbox locks the agitator and spins the basket and agitator together. I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
December 28, 2012
See more answers

Top Parts