Model #LSQ8000HQ0 WHIRLPOOL Residential Washers

  • Top And Cabinet
    3 Results
  • Controls And Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Brake/clutch/gearcase/motor/pump
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness
    3 Results
  • Water System
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

howi can i instole motor couplint on washer modle No lsq8000hq0

A:

That's great to hear that you are will and wanting to change the coupler on your own. I have found a few links that might help you upon the replacement of the part. The first link is the Owner's Manual and the second one is an expert providing instructions in replacing the part even though it might be a different model number the mechanics are the same.

Read More
celene -
March 14, 2011
A:

Thank you for your question.

I am sorry you are having a problem with your washer. To replace the coupler unplug the washer first. Then use the images below to access the coupler. Use a screwdriver to pry off the rest of the old coupler. Then tap the new coupler onto the shafts with a deep well socket and a hammer. The parts of the coupler should be flush with the end of the shafts. Then reassemble the washer in the reverse order.

I hope this is helpful. Please let me know if you need further assistance.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
March 15, 2011
See more answers
Q:

Why is the agitator on my Whirlpool washer just spinning freely?

A:

The upper section of the agitator is the auger section. The auger has dogs that only allow the auger to turn in one direction as the agitator turns in both. On something like this the dogs get stripped out & are not engaging. This is why the auger is spinning freely. I recommend replacing the agitate cam assembly, part number 285809.

Read More
biker dave -
Sears Technician
December 18, 2009
A:

hey biker, thanx for the answer but how do you replace the thing?

Read More
jka224 -
September 28, 2010
See more answers

Top Parts