Model #LSQ7030LQ0 WHIRLPOOL Residential Washers

  • Top And Console/literature
    3 Results
  • Controls And Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Machine Base
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump
    3 Results
  • Wiring Harness
    3 Results
  • Brake And Drive Tube
    3 Results
  • Gearcase
    3 Results
  • Water System
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Ratcheting mechanism defective. Makes Noise. LSQ7030LQ0 Whirlpool Washer - direct drive

A:

Thank you for choosing SearsPartsDirect.com. I will be more than happy to assist you. I can understand any frustration you may have experienced with regards to your unit. Let’s see what we can do for you.

It would be the agitator dogs. There are 4 small pieces that make the washer agitate. I would suggest replacing the cam agitator assembly. This will come with everything need to fix your washer. Part number is 285809.

Hope this information has helped you. If you are not comfortable doing this repair you can click here to schedule a technician or call toll free 1-800-469-4663. Again, thank you for choosing SearsPartsDirect.com.

 

Read More
JeffwallaceIII -
Sears Technician
July 07, 2015
A:

How do I remove this "cam assembly"?

Read More
Gary -
July 07, 2015
A:

I have not got an answer back yet for the above question. Repeat: How do I remove the "Cam Agitator Assembly" Part Number 285809 for the model LSQ7030LQ0 Whirlpool washer? gary.schmidt@twc.com 8129899036

Read More
Gary -
July 10, 2015
See more answers
Q:

Whirlpool Ultimate Care II washing machine Model LSQ7030LQ0 will not drain and spin.

A:

Having your washer fail to spin can be a real headache. I did some research and provided a link to a similar question and answer on our site. I hope this will shed a little more light on the issue until the Expert responds to your question in more detail within 24 to 48 hours.

Read More
Julio -
June 27, 2013
A:

Thank you for your question. It is the pump that will need replacing and while you are replacing the pump you may want to check the condition of the motor coupling if it looks cracked or brittle it also will need replacing.

Pump  3363394

coupler 285753A

You can order these parts at www.SearsPartsDirect.com at this website you will also see a schematics of the parts and how they go.

If you have more questions please reply to this post.

Thank you for choosing Manage My Life.

Read More
dtova00 -
Sears Technician
June 28, 2013
A:

Well, I replaced the pump and nothing. I guess I will try and jump the lid switch and see if that works.

Read More
Craig -
July 02, 2013
A:

Craig, thank you again for responding and giving some insight as to where you are with the repair. The lid switch would have nothing to do with the leak. It will stop the agitation and the washer will sit full of water and do nothing else if in fact it was the lid switch. Get a piece of cardboard and put it under the washer. Put a pitcher of water in the washer and see if you can at least get a location of where the leak is coming from. If you want a service person to take care of this, we will gladly help. Service can be scheduled at www.SearsHomeServices.com. Reply to this post with more questions. Thank you for choosing Manage My Life.

Read More
dtova00 -
Sears Technician
July 02, 2013
A:

The pump was leaking but replacing it did not fix the problem. The problem is that after the washer agitates it does not drain. I don't know if it is the lid switch or the main control. I am going to look at the lid switch first and if it is not that then I am thinking it could be the main control switch. What do you think? Any Ideas?

Read More
Craig -
July 02, 2013
A:

Craig, Thank you again. Have you replaced the coupler as suggested? Again it is not the lid switch nor the control board. Reply to this post and keep me posted. Thank you again for choosing Manage My Life.

Read More
dtova00 -
Sears Technician
July 02, 2013
A:

Let's take a step back for a moment before I replace anymore parts. The washer does fill with water then it agitates and then it stops. It does not drain and spin. It just sits there full of water and does nothing.

Read More
Craig -
July 02, 2013
A:

No, I have not replaced the coupler as suggested. In your earlier post (about 3 hrs ago)you stated "It will stop the agitation and the washer will sit full of water and do nothing else if in fact it was the lid switch." This is exactly what is happening. Please expand on why you think the problem is the coupler.

Read More
Craig -
July 02, 2013
A:

Thank you for your question. I see that in the first response you state it agitates and fills and washes but it will not drain nor will it spin. The motor coupler is very important. Here is a link to view a video from you tube on this type of repair. I hope this helps Thank you for choosing Manage My Life.

Read More
dtova00 -
Sears Technician
July 03, 2013
A:

Well, as stated earlier I jumped the lid switch with an insulated jumper wire at the connector and it went straight into drain and spin. So, I will be purchasing the lid switch. I know where to get one at searspartsdirect.

Read More
Craig -
July 05, 2013
See more answers
Q:

Washing machine

A:

A washer is an appliance we depend on so much, when there's laundry to be done. While you are waiting for an expert to respond, I have attached a helpful link below that may provide information to assist you with your question.

Read More
Yadira B -
April 03, 2013
A:

Thank you for your question.  I am sorry you are having a problem with your Whirlpool LSQ7030LQO washer

If the washer will agitate and drain then I suspect the motor and lid switch are okay.  Try to catch what happens in the spin during the cycle.  Try the spin cycle with an empty load and see if the basket will spin.  A weak basket drive might alow the washer to spin when empty but will not spin when there is a load.  Are the clothes pushed to the side of the basket or do they sit in the bottom of the basket like there was no spin at all.  If the washer will drain but not start a spin then try opening the lid and closing it and see if the spin starts.  If the timer doesn't pause then the machine will not transition from drain to spin. 

I hope this helps.  You can reply below with any additional details for further assistance. 

You can also have the problem checked and repaired in your home by a Sears technician.  Here is the link for that service: Sears Home Services Washer Repair

Read More
Fred M -
Sears Technician
April 04, 2013
See more answers

Top Parts