Model #LSN1000KT0 WHIRLPOOL Residential Washers

  • Top And Cabinet/literature
    3 Results
  • Controls And Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Machine Base
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump
    3 Results
  • Wiring Harness
    3 Results
  • Brake & Drive Tube
    3 Results
  • Gearcase
    3 Results
  • Water System
    3 Results
  • Miscellaneous/optional
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Unable to seperate washing machine upper agitator from lower

A:

I did some research on your model number but was not able to find a solution for the agitator. Your expert will be able to help answer your question. It may take two business days. I do hope that everything works out on the washer.

Read More
Marc -
January 09, 2013
A:

Finally figured it out. For anyone in the future that watches all the youtubes of this process and see everyone simply pop the top of the agitator off with little effort, please know that on this model no amount of pullling on it will work because there is a mechanical connection. The lower agitato section has four finger that protrude up into the cam and are melted to the cam at the factory. Use a dremel to cut off the tops of these four fingers and it will come off. Wow that was a pain to figure out.

Read More
brandon418 -
January 09, 2013
A:

Thank you for submitting your question. Brandon, I'm glad you were able to get the agitator apart. Also, thank you for providing the repair information. Please let us know if we can assist you with any other future repairs. Thank you for using Manage My Life.

Read More
Tykara -
Sears Technician
January 10, 2013
See more answers

Top Parts