Model #LSE7800ACW MAYTAG Laundry Centers/Combos

  • Front (lse7800adw,dl,cw,cl) (lse7800acl) (lse7800acw) (lse7800adl) (lse7800adw)
    3 Results
  • Front (lse7800ace,ade,aee) (lse7800ace) (lse7800ade) (lse7800aee)
    3 Results
  • Front (lse7800ael,aew) (lse7800acl) (lse7800acw) (lse7800adl) (lse7800ace) (lse7800ade)
    3 Results
  • Frnt Pnl & Cntrl Pnl(lse7800adw,dl,cw,cl (lse7800acl) (lse7800acw) (lse7800adl) (lse7800adw)
    3 Results
  • Frnt Pnl & Cntrl Pnl(lse7800ace,ade,aee) (lse7800acl) (lse7800acw) (lse7800adl) (lse7800ace) (lse7800ade)
    3 Results
  • Front Panel & Cntrl Pnl (lse7800ael,aew) (lse7800acl) (lse7800acw) (lse7800adl) (lse7800ace) (lse7800ade)
    3 Results
  • Cabinet-dryer (lse7800adw,adl,acw,acl) (lse7800acl) (lse7800acw) (lse7800adl) (lse7800adw)
    3 Results
  • Cabinet-dryer (lse7800ace,ade,aee) (lse7800acl) (lse7800acw) (lse7800adl) (lse7800ace) (lse7800ade)
    3 Results
  • Cabinet-dryer (lse7800ael,aew) (lse7800acl) (lse7800acw) (lse7800adl) (lse7800ace) (lse7800ade)
    3 Results
  • Door (lse7800adw,adl,acw,acl) (lse7800acl) (lse7800acw) (lse7800adl) (lse7800adw)
    3 Results
  • Door (lse7800ace,ade,aee) (lse7800ace) (lse7800ade) (lse7800aee)
    3 Results
  • Door (lse7800ael,aew) (lse7800acl) (lse7800acw) (lse7800adl) (lse7800ace) (lse7800ade)
    3 Results
  • Tumbler (lse7800adw,adl,acw,acl) (lse7800acl) (lse7800acw) (lse7800adl) (lse7800adw)
    3 Results
  • Tumbler (lse7800ace,ade,aee) (lse7800ace) (lse7800ade) (lse7800aee)
    3 Results
  • Tumbler (lse7800ael,aew) (lse7800ael) (lse7800aew)
    3 Results
  • Motor (lse7800adw,adl,acw,acl) (lse7800acl) (lse7800acw) (lse7800adl) (lse7800adw)
    3 Results
  • Motor (lse7800ace,ade,aee) (lse7800ace) (lse7800ade) (lse7800aee)
    3 Results
  • Motor (lse7800ael,aew) (lse7800ael) (lse7800aew)
    3 Results
  • Blower & Lint Screen (lse7800adw,dl,cw&l (lse7800acl) (lse7800acw) (lse7800adl) (lse7800adw)
    3 Results
  • Blower & Lint Screen (lse7800ace,de,ee) (lse7800acl) (lse7800acw) (lse7800adl) (lse7800ace) (lse7800ade)
    3 Results
  • Blower & Lint Screen (lse7800ael,aew) (lse7800ael) (lse7800aew)
    3 Results
  • Heater (lse7800adw,adl,acw,acl) (lse7800acl) (lse7800acw) (lse7800adl) (lse7800ace) (lse7800ade)
    3 Results
  • Heater (lse7800ace,ade,aee) (lse7800acl) (lse7800acw) (lse7800adl) (lse7800ace) (lse7800ade)
    3 Results
  • Heater (lse7800ael,aew) (lse7800ael) (lse7800aew)
    3 Results
  • Lid Lock (lse7800adw,adl,acl,acw) (lse7800acl) (lse7800acw) (lse7800adl) (lse7800adw)
    3 Results
  • Lid Lock (lse7800ace,ade,aee) (lse7800ace) (lse7800ade) (lse7800aee)
    3 Results
  • Lid Lock (lse7800ael,aew) (lse7800acl) (lse7800acw) (lse7800adl) (lse7800ace) (lse7800ade)
    3 Results
  • Cabinet (lse7800adw,adl,acw,acl) (lse7800acl) (lse7800acw) (lse7800adl) (lse7800adw)
    3 Results
  • Cabinet (lse7800ace,ade,aee) (lse7800acl) (lse7800acw) (lse7800adl) (lse7800ace) (lse7800ade)
    3 Results
  • Cabinet (lse7800ael,aew) (lse7800acl) (lse7800acw) (lse7800adl) (lse7800ace) (lse7800ade)
    3 Results
  • Cabinet-rear (lse7800adw,adl,acw,acl) (lse7800acl) (lse7800acw) (lse7800adl) (lse7800ace) (lse7800ade)
    3 Results
  • Cabinet (rear Lse7800ace,ade,aee) (lse7800acl) (lse7800acw) (lse7800adl) (lse7800ace) (lse7800ade)
    3 Results
  • Cabinet-rear (lse7800ael,aew) (lse7800acl) (lse7800acw) (lse7800adl) (lse7800ace) (lse7800ade)
    3 Results
  • Tub Cover (lse7800adw,adl,acw,acl) (lse7800acl) (lse7800acw) (lse7800adl) (lse7800adw)
    3 Results
  • Tub (lse7800ace,ade,aee) (lse7800ace) (lse7800ade) (lse7800aee)
    3 Results
  • Tub Cover (lse7800ael,aew) (lse7800ael) (lse7800aew)
    3 Results
  • Tub-inner & Outer (lse7800adw,dl,cw,cl) (lse7800acl) (lse7800acw) (lse7800adl) (lse7800adw)
    3 Results
  • Tub (inner & Outer Lse7800ace,ade,aee) (lse7800ace) (lse7800ade) (lse7800aee)
    3 Results
  • Tub-inner & Outer (lse7800ael,aew) (lse7800ael) (lse7800aew)
    3 Results
  • Transmission (lse7800adw,adl,acw,acl) (lse7800acl) (lse7800acw) (lse7800adl) (lse7800adw)
    3 Results
  • Transmission (lse7800ace,ade,aee) (lse7800ace) (lse7800ade) (lse7800aee)
    3 Results
  • Transmission (lse7800ael,aew) (lse7800ael) (lse7800aew)
    3 Results
  • Base (lse7800adw,adl,acw,acl) (lse7800acl) (lse7800acw) (lse7800adl) (lse7800adw)
    3 Results
  • Base (lse7800ace,ade,aee) (lse7800ace) (lse7800ade) (lse7800aee)
    3 Results
  • Base (lse7800ael,aew) (lse7800ael) (lse7800aew)
    3 Results
  • Base-brake (lse7800adw,adl,acw,acl) (lse7800acl) (lse7800acw) (lse7800adl) (lse7800adw)
    3 Results
  • Basebrake (lse7800ace,ade,aee) (lse7800ace) (lse7800ade) (lse7800aee)
    3 Results
  • Base-brake (lse7800ael,aew) (lse7800ael) (lse7800aew)
    3 Results
  • Motor & Pump (lse7800adw,adl,acw,acl) (lse7800acl) (lse7800acw) (lse7800adl) (lse7800adw)
    3 Results
  • Motor & Pump (lse7800ace,ade,aee) (lse7800ace) (lse7800ade) (lse7800aee)
    3 Results
  • Motor & Pump (lse7800ael,aew) (lse7800ael) (lse7800aew)
    3 Results
Find part by diagram >

Question and Answers

Q:

Run Relay Maytag LSE7800ACW washer/dryer combo

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help you with your laundry center. Upon researching modelLSE7800ACW; relays can go out and it’s not uncommon for them to go out. The relays shouldn’t go out that quick. I would look for damaged or stripped wires. There may be a different part causing the relay to go out.

Thank you for choosing Sears. We appreciate your business and have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
July 29, 2015
Q:

washer will not shut off. all ready replaced timer. LSE7800ACW Maytag Maytag stack laundry

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your laundry center. Upon researching modelLSE7800ACW; the timer could be bad. Also check the wiring to make sure there isn’t any damage or shorting out wires.

Thank you for choosing Sears. We appreciate your business. Have a great day.    

Read More
Jeff Wallace Jr -
Sears Technician
December 23, 2014
A:

jeff, thanks for your help. at the end of cycle when the timer comes to the off position , dose the center timer shaft pop out electrically, or is there a cam on the dial?

Read More
michael -
December 23, 2014
See more answers
Q:

Replaced the water level switch. Recorded old wiring connections and took pictures. Washer now goes straight to agitate without filling up. Maytag #LSE7800ACW.

A:

When the Kenmore washer starts agitating without water, it may not make sense until you check out the link provided below on a similar issue. Additional information may take two business days, usually sooner. If you decide on service, that link is also available.

Read More
Anna T -
February 27, 2013
A:

I appreciate the advice for the Kenmore. But since mine is a Maytag and I've already replaced 2 water level related switches, I will wait on advice for my particular model. Thanks for the help.

Read More
Doyle -
February 27, 2013
A:

The new pressure switch should have come with an instruction sheet that is shown in the first image below. Your wires may not match up with that instruction sheet. I posted a second image that has wiring connections for certain versions of the LSE7800ACW. That information may help you check the wiring connections and install that pressure switch properly. 

 

If you need more help, reply with additional details and a photograph of your pressure switch that shows wires color and the connections that you are using.

 

This can be a difficult part to install due to the revision of that pressure switch. If you get to a point where you need to have a service technician install that pressure switch, you can schedule service through this page: Sears Home Services Washer Repair. 

Read More
Lyle W -
Sears Technician
February 28, 2013
A:

Lyle, I followed the 2nd wiring instruction sheet. My original connections for the orange wires were terminals 13, 23 and 33. This switch has 14, 24 and 34 terminals. I recorded where the original were connected and how I connected the new switch if you can help me there. Let me know if you want the details. Also the pics I took of old and new switch were too large for posting. I can re-size them if needed. Any help is very appreciated. Thanks, Doyle

Read More
Doyle -
February 28, 2013
A:

Hello Doyle. Do you have a wiring diagram that came with the washer? If you do, I could use a copy of that document to help you connect this pressure switch properly. There is a 2 MB size limit on photos and images on our site. You may be able to resize the photos and post them in a reply. I will look for an accurate wiring diagram for that model myself. It would also help to have the serial number of the washer. Maytag uses the serial number to indicate the model revision of the washer. That revision number affects the wiring and components in some models.

Read More
Lyle W -
Sears Technician
March 01, 2013
A:

Thanks Lyle, I will get the wiring diagram scanned and sent. Also, re-size the pics of the old switch with wires connected and the new switch. Thanks again, Doyle

Read More
Doyle -
March 01, 2013
A:

Lyle, here are pics of the old and new switch re-sized. I will have the wiring diagram scanned and sent later. Thanks, Doyle

Read More
Doyle -
March 01, 2013
A:

Thanks for sending those pictures Doyle. I checked the connections. The orange wires should be connected to the terminals 34, 14 and 24 as you have them on the new pressure switch. I will look at the wiring diagram once you send me that document.

Read More
Lyle W -
Sears Technician
March 01, 2013
A:

Lyle, with 3 different orange wire connections, please advise which ones go to 14, 24 or 34. I had the combo R jumper to 14, the #45&R to 24 and the #46&R to 34. On the white wires, I had the F jumper combo to 12, white/green combo to 22 and the other white jumper to 32. Also put a piece of rubber tubing between 2 terminals that were touching. Here is the diagram. Thanks again for all your help, Doyle

Read More
Doyle -
March 01, 2013
A:

Hello Doyle. Thanks for sending that wiring diagram. I examined that document. According to that wiring diagram, it appears that you should connect the orange combo R jumper to 24 instead of 14 and the orange combo 45R jumper to 24 instead of 24 (switch those connections). On the white wires, the F jumper should go to 22 and the white/green to 12 (switch those wires). Those revisions may fix your problem. If you need more help, let us know.

Read More
Lyle W -
Sears Technician
March 04, 2013
See more answers

Top Parts