Model #LSB6000PQ2 WHIRLPOOL Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Controls And Rear Panel Parts
    3 Results
  • Agitator, Basket And Tub Parts
    3 Results
  • Machine Base Parts
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump Parts
    3 Results
  • Wiring Harness Parts
    3 Results
  • Brake And Drive Tube Parts
    3 Results
  • Gearcase Parts
    3 Results
  • Water System Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


Broken couplers LSB6000PQ2 Whirlpool Residential washer


When you tap the cogs of the new coupler on the shafts of the motor and the transmission, make sure that the ends of the shafts are flush with the inside surfaces of the plastic cogs. You can use a 1/2" socket drive extension or the butt end of a slot screwdriver to tap the plastic cogs down on the motor and transmission shafts if necessary. Use both of the new cogs and the new rubber isolator when replacing the coupler.

Make sure that the rubber grommets are positioned properly on the mounting feet of the motor as you push the motor against the motor mounting plate on the transmission.

These tips may help. If not, you could have a problem with the transmission that you have not yet detected. Other problems with the drive system could also be causing the coupler to break.

If you need more help, let us know.

Thanks for choosing Sears PartsDirect.

Read More
Lyle W -
Sears Technician
May 29, 2014

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show