Model #LRFD25850TT LG Bottom-Mount Refrigerator

  • Case Parts
    3 Results
  • Freezer Parts
    3 Results
  • Refrigerator Parts
    3 Results
  • Door Parts
    3 Results
  • Dispenser Parts
    3 Results
  • Ice Maker Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

door hook assembly LRFD25850TT Lg Refrigerator

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
May 13, 2014
Q:

french door freezer leaking

A:

Any leaking has to be cause for alarm especially on an appliance like the LG Bottom Mount refrigerator. I provided some similar links that may help solve the issue with the leaking in the freezer. Thanks for your patience as the experts respond to your question.

Read More
Anna T -
March 12, 2012
A:

Thank you for your question. I can understand your concern about the water leak. This does sound like a drain problem. First, check to see if the drain tube (#105A in picture) behind the unit is plugged. If it's clear, it could be a frozen drain. To clear the drain, everything in the freezer and the drawer will need to be removed, so the back panel can be taken out (second image). This can be a difficult job getting to the drain and a technician may be needed. The owner's manual will have pictures and instructions to remove the freezer drawer on page 13. Use hot water to clear a frozen drain. I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
March 14, 2012
See more answers
Q:

Ice maker will not fill with water, help

A:

Having one of the features not working on the refrigerator can be a frustrating ordeal. I was able to find some general information that might help you along on fixing your issue. I have attached the link below while you are waiting on your expert to answer your question. Hope this helps!

Read More
Dezeray S -
February 01, 2011
A:

Having an icemaker is a great feature but when it fails can be very disappointing. There is also a valve located inside the door (see picture) that feeds both the dispenser and icemaker. If you are manually cycling the icemaker (holding the water level button for 3 seconds) listen for a humming sound, toward the end of the cycle. If you can hear this sound, it indicates the water valve is getting energized but not opening. The valve # 6877JB3036V in the door will need to be replaced. If you do not hear this sound, some voltage checks will need to be made. A technician will be needed to make these checks. I'm listing a site you can access, to have a tech come out. Here is a link for the website: Sears Home Services . I hope this will help you. Thank you for using Manage My Life.

Read More
Scott D -
Sears Technician
February 02, 2011
A:

I have an LG Bottom freezer, with the same problem. I traced it back ot the solenoid, which is not receiving voltage. When it receives 120v, it opens and flows water. What sends the signal to it and where do I go next? Thanks!

Read More
Kris -
September 21, 2011
A:

Kris, the problem could be with the icemaker itself or the main control board. For more specific information, the complete model and serial number will be needed. Thank you for using Manage My Life.

Read More
Scott D -
Sears Technician
September 22, 2011
A:

I already replaced the icemaker. It is an LRFD25850TT. After thinking about it, when I put voltage to the solenoid, it flowed water, but little pressure. I will check today to see if it indeed is receiving voltage during the cycle, but the solenoid is not opening enough to all enough pressure to fill the cavities. Oddly, it made 1 cube last night. Perhaps I have a defective solenoid.

Read More
Kris -
September 22, 2011
A:

Based on this additional information, the most likely problem will be a defective water valve # 5220JB2008A . It could also be low water pressure but if the water dispenser is working ok, the pressure should be ok also. The water valve is available at the link listed below.

Read More
Scott D -
Sears Technician
September 22, 2011
A:

Sorry, the link is listed below.

Read More
Scott D -
Sears Technician
September 22, 2011
A:

That's what I am thinking. I will switch water lines and confirm, but I bet that is it. Thank you for your help. Sears has the best price on the item as well!

Read More
Kris -
September 22, 2011
A:

Thank you for using Manage My Life.

Read More
Scott D -
Sears Technician
September 22, 2011
A:

Water valve came today and problem not solved. Water still not entering tray. I do get 120v when I run the icemaker through the cycle and I hear the solenoid make noise like it is opening, but does not pass water. I switched leads to the water dispenser and then water flows to the ice maker as it should. I do not know why 120v through the icemaker is different than 120v through the water dispenser, but I tried it over and over and i get the same result. What now? Thanks!

Read More
Kris -
September 26, 2011
See more answers

Top Parts