Model #LNC6760A71 ADMIRAL Residential Washers

  • Control Panel
    3 Results
  • Top
    3 Results
  • Cabinet
    3 Results
  • Tub
    3 Results
  • Transmission
    3 Results
  • Base
    3 Results
  • Wiring Information
    3 Results
Find part by diagram >

Question and Answers

Q:

Admaril capacity plus top loader, belt burning.

A:

Appliances have many electronic features to help make laundry day easier. As with all electronics, sometimes they go a little haywire. If you can add the model number of your washer to this thread, it will help the expert provide a more precise answer. If you would like to turn this over to an experienced technician to diagnose and repair, an option is to visit Sears Home Services and use the scheduler

Read More
Priscilla V -
March 21, 2011
A:

Thank you for your question.

I can understand wanting to know if the washer is worth fixing.

Without the model number I will only be able to give you some general information.

It could be that the spin brake is not releasing and causing extra stress on the drive system. The designs of the drive system have changed over the years and I cannot tell without the model number which type you have on this model.

It could be as simple as a brake solenoid or a major as a transmission.

If you would communicate the model number to me I would be more than happy to help you further.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
March 22, 2011
A:

Hi, I have the exact same issue as the spin won't work, there's a loud screeching noise, and there's a smell of burnt rubber. I own an Admiral Capacity Plus Washer. Model #: LNC6760A71 Please let me know what you think the problem is. Thanks! -Sam

Read More
Sam -
June 01, 2011
A:

Thank you for your question. This Montgomery Ward washer built by Norge has a slipping belt design and a flex spring that tightens the belt as the spin builds up speed during the spin cycle. The first thing I would suggest is to change the belt and if you would want to you can remove the front panel on the washer and check the slide system for being rusty or gummed up and it may need to be cleaned so it will slide freely in the slots. Also make sure the tension butterfly spring on the side of the motor is still in place. I hope this will help and let me know what you find after opening the front panel. Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
June 01, 2011
See more answers

Top Parts