Model #LGR7646DQ0 WHIRLPOOL Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • 3401771 Burner Assembly
    3 Results
  • Bulkhead
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Is there a flame sensor on my gas dryer? LGR7646DQ0

A:

Thank You for contacting SearsPartsDirect.com

Based on the information you have provided. It sounds like you have a weak ignitor. The ignitor constantly turns on and off during a cycle. It may only have enough power for the original ignition. I recommend replacing the ignitor.

Read More
Desirea -
Sears Technician
March 07, 2015
Q:

Dryer Not Starting LGR7646DQ0 Whirlpool Gas dryer

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Julio -
June 29, 2013
A:

Thank You for choosing SearsPartsDirect.com

I understand the frustration when you dryer is not working. Based on the information you have provided, it sounds like your door switch has malfunctioned and it doesn't recognize the door is shut. To ensure your door closes completely I would recommend replacing the door latch kit as well, because these parts wear down over time. Especially if you had to open and shut the door several times to get it to start.

I have included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link below to be taken to the page.

Door Switch/Sensor for Model LGR7646DQ0

Door Latch Kit for Model LGR7646DQ0

If you have further questions please let me know.
Thanks for choosing SearsPartsDirect.com

Read More
Desirea -
Sears Technician
June 30, 2013
See more answers

Top Parts