Model #LGR7646AW2 WHIRLPOOL Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • 3401771 Burner Assembly
    3 Results
  • Bulkhead
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


How do I convert my gas dryer back to natural gas?


You will need to remove the LP orifice and replace it with the original Natural gas orifice. The pressure regulator most likely has a "cap screw" to remove and either take a blocking pin out; if it has no blocking pin, flip the "cap screw" over and screw back on to convert it back for natural gas. I added an image showing the gas valve and the "cap screw". Located between the two white wire harness connectors is the "cap screw" with a slotted brass or aluminum cap screw. Use a flat bladed screw driver to remove the "cap screw" flip it over and re-install the "cap screw". Adjust the air shutter as needed for the proper air to fuel mixture. It should have a blue flame with very little yellow.

I recommend calling a service technician to convert your dryer back to natural gas.

Read More
Joey S -
Sears Technician
June 27, 2008

I have a Whirlpool gas dryer, model LGR7646AW2, and I would like to convert it back to natural gas as well. Is it the same for my dryer as this one? Just replace the orifice and flip the cap screw?

Read More
Clifford -
April 21, 2012
See more answers

Top Parts