Model #LGR3624EQ2 WHIRLPOOL Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
  • 3402844 Burner Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


Why would cause my Whirlpool gas dryer to quit heating and timer not advancing all the way to off at the same time?


Based on your symptoms in your details the likely failure is the thermal fuse (key#6). A failed thermal fuse will prevent the dryer from producing heat and prevent the timer from advancing all the way to the off position.

The thermal fuse (key#6) likely opened due to a restricted venting system or either the operating thermostat (key#8) or high limit thermostat (key#15) failed to open and turn the heat off. See image below for component locations.

The thermal fuse (key#6) is part# 3392519 and can be accessed by removing the rear panel. NOTE: Disconnect the power cord from the power source before removing the rear panel.

Read More
Joey S -
Sears Technician
July 31, 2009

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show