Model #LGGF3043KFG FRIGIDAIRE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

model # lggf3043kfg LGGF3043KFG Frigidaire Gas range

A:

Thank you for choosing Sears Parts Direct. I can certainly understand how frustrating it can be when your oven displays an error code after replacing a part. I did look into the model number you have provided and I have found information that will assist you. If the sensor appears to be okay, you can check the wiring (with the range still unplugged) between the probe and the ERC (Electronic Range Control board). A wiring failure could also cause this problem. 

If you are not able to find a problem with the probe or the wiring, then you could have a failed electronic range control (ERC) board. Replacing the temperature probe may fix this problem if the wiring is okay. If you replace the probe and still have a problem, then it is likely that the ERC control board will need to be replaced.

Click here for the ERC
Click here for the ERC overlay


Thank you for your question. Have a great day.

Read More
Natasha12 -
Sears Technician
March 26, 2014
A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is trouble with the range.
 
Glad to help out.   Im  looking at your Frigidaire Gas Range model number LGGF3043KFG.

I see you have an error code of F31.   Have the information out of the Service Manual.

F31 ->  SHORTED PROBE CIRCUIT:

1. Check resistance at room temperature & check  the oven sensor.   Check with a meter and also check the wiring harness between the sensor probe and the main control board.

2.  Check resistance at room temperature, if less than 500 ohms, replace the sensor probe.  Check for open or shorted sensor probe harness between control board and the probe connector.

sensor probe for model 
LGGF3043KFG

Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs. "Please resubmit" if there are any further questions or statements.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 


Read More
Larry L -
Sears Technician
March 26, 2014
A:

hi; my problem is my oven will not ignite ! all my burners work fine along with the broiler < the oven igniter glows really brite and hot but doesn't seem to be getting any gas ,which is propane , was working fine for appox. 1 1/2 yrs model #LGGF3043KFG - i checked the back control to make sure it was on , cleaned everything even vacuumed inside the oven gas tube , still won't work

Read More
Robert -
July 04, 2014
See more answers

Top Parts