Model #LGEF3045KFA FRIGIDAIRE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

Hot surface lite stays on and set oven temp not being obtained LGEF3045KFA Frigidaire Electric range

A:

Thank you for your inquiry on your Frigidaire Range, Model: LGEF3045KFA. From reviewing the details on your model, it appears that the temperature probe might have gone bad in the range the temperature probe regulates how hot the oven gets and send a message to the control board which reads how hot the oven got. The only other thing I can think of that might cause this problem would be the control board/ Timer is not recognizing the messages sent by the temperature probe. I have linked up both parts below for your convince.  
                                                                                                                                     Click Here For Temperature Probe 

Click Here For Control Board

Safety Warning: Before beginning the repair, disconnect the direct power supply to the range to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry93 -
Sears Technician
February 26, 2015
Q:

Low Temp / hot surface lite stays on. LGEF3045KFA Frigidaire Electric range

A:

Thank you for your inquiry on your Frigidaire Range, Model: LGEF3045KFA. From reviewing the details on your model, it appears that the temperature probe might have gone bad in the range the temperature probe regulates how hot the oven gets and send a message to the control board which reads how hot the oven got. The only other thing I can think of that might cause this problem would be the control board/ Timer is not recognizing the messages sent by the temperature probe. I have linked up both parts below for your convince.  
                                                                                                                                     Click Here For Temperature Probe 

Click Here For Control Board

Safety Warning: Before beginning the repair, disconnect the direct power supply to the range to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry93 -
Sears Technician
February 26, 2015

Top Parts