Model #LGB6200PQ1 WHIRLPOOL Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
  • 8318272 Burner Assembly, Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

dryer only works for short time LGB 6200PQ1

A:

Thank You for choosing Sears PartsDirect.com. I regret to hear that you are having issues with your dryer and do understand your frustration. Glad to help out. Im looking at your model number LGB 6200PQ1 and If the igniter is shutting of and voltage is applied to the coils but no gas is released then most likely the coils need to be replaced. If you have a volt/ohm meter you can check continuity across the coils and if any circuit is open then the coils will need to be replaced. If the coils all check okay then most likely the valve is bad and will need to be replaced. I have included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link above to be taken to the page. If you have further questions please resubmit your question for further information.
 
Thank you for choosing Sears PartsDirect.com.
 
SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
May 16, 2014
Q:

Problem With A Whirlpool Dryer

A:

Thanks for contacting ManageMyLife.com. I understand how frustrating it is having trouble with your dryer not working properly. We are here to help. Based on the symptom and what you already replaced, I suspect a problem with the heat circuit or a bad connection at the timer. On this particular dryer for the timer to advance in the automatic cycle or to off in the timed cycle, the dryer must heat. Since the dryer does not heat, then most likely the thermal fuse is the problem. The image below show the location of the thermal fuse. The thermal fuse can be checked with a multimeter. If the dryer is heating, then there may be a bad connection at the timer block on the orange wire. I recommend checking the timer wire connections. I hope this helps.

To order dryer parts, please visit SearsPartsDirect.com with the model number.

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Read More
John H -
Sears Technician
September 23, 2013

Top Parts