Model #LFC20760SB LG Bottom-Mount Refrigerator

  • Case
    3 Results
  • Freezer
    3 Results
  • Refrigerator
    3 Results
  • Doors
    3 Results
  • Ice And Water Maker
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How do I raise the volume of my door alert on an LG refrigerator?

A:

I understand the importance of being able to hear that alarm go off on the refrigerator,which will eliminate any malfunction that can occur to your refrigerator. I have done some research on your model on the Manage MY Life website and have locate the owners manual to your model. While you are waiting for a detailed reply I have provided the link below. Hope this helps!

Read More
Priscilla V -
April 13, 2012
A:

I'm sorry to say there is no volume adjustment for the door alarm feature on this particular refrigerator.

Read More
Fred M -
Sears Technician
April 13, 2012
See more answers
Q:

Our ice maker stopped making ice. The lg refrigerator is only 1 1/2 years old. Anyone know what the problem might be?

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Barbara H. -
November 12, 2011
A:

The most common cause of an icemaker to not fill is the fill tube freezing up. When the fill tube freezes it is usually the water valve not turning all the way off that causes it. The water valve leaks a very small amount of water and this water freezes inside the fill tube. Look above your icemaker at the fill tube coming in above your icemaker. If it is frozen you can defrost it with a hair dryer.

To test the water valve disconnect the power from the refrigerator and remove the panel across the lower bottom of the refrigerator. Reverse the white and tan wires and the white and violet wires on the water valve. Press the dispenser cradle that calls for water and the water will run into the icemaker if the water valve is good.

If you get water into the icemaker molds in this test the icemaker is bad. If you get no water the water valve is bad. For additional information please resubmit your question or if you don't feel comfortable repairing the unit you can make a service appointment at www.searshomeservices.com .

Read More
Jerome G. - Personal Solutions Manager -
Sears Technician
November 14, 2011
See more answers

Top Parts