Model #LER4634JQ2 WHIRLPOOL Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Brown Marks on Clothes LER4634JQ2 Whirlpool Residential dryer

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Whirlpool dryer.

From the information you have provided above, I can understand the frustration of having your dryer malfunction, after researching model number LER4634JQ2. It seems to me like there is an issue with the drum felt on the dryer. This will cause those brown marks on the clothes. the felt is probably ripped and the clothes rub up against it causing the marks. I would suggest checking into the unit to see if it’s coming from the front or back. You can set up a service call to have a technician diagnose by visiting searshomeservices.com.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
March 10, 2015
Q:

why my whirpool dryer not heating ?

A:

I understand that your Whirlpool dryer is not heating. I have taken some time to research your question here on the Manage My Life website and I noticed that someone else had asked a similar question with a posted response from an expert. I attached the link below for you to view. I hope the link that I provided is helpful. Have a nice day.

Read More
Alina F. -
August 11, 2011
A:

Thank you for your question and I understand your concern.

Based on your model number and symptom it sounds like your not getting 220 volts to the dryer. Your specific timer needs 220 volts in order to advance and the heating element also needs 220 volts to heat.

I recommend locating the two (2) house circuit breakers dedicated for the dryer and reset both circuit breakers. Flip both circuit breakers OFF and ON 2-3 times and then check the dryer for heat. If it heats after resetting the two circuit breakers the timer will also likely advance. If it continues to run and not heat then the voltage supply will need to be checked and confirmed where it connects to the back of the dryer. The voltage must measure 220-230 volts when measuring across the two outside terminals or it will not heat or advance. There could also be a loose or burnt wire connection at the terminal block causing the dryer to not heat NOTE: I do not recommend checking voltages unless you have experience and you feel safe and confident in doing so; otherwise I recommend calling for service.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
August 12, 2011
A:

thanks, but I check the volts, and have, 240 volts, in the wall, , maybe something in the dryer is not working, I can check the timer and working good, but no receive 240 volts, maybe one fuse or anything, please help me, I don't know what part I need test to.

Read More
ricardo -
August 12, 2011
A:

Ricardo; You may show 240 vac at the wall but what about at the terminal block where the power cord attaches to the dryer. I added a wiring diagram of your dryer below. I high lighted the circuits in red and green. I also circled all the component in red which must close in order to complete the circuit to the timer and heating element.

Read More
Joey S -
Sears Technician
August 12, 2011
See more answers

Top Parts