Model #LER4634JQ0 WHIRLPOOL Residential Dryer

  • Top And Console/literature
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


No heat in dryer ler4634jq0


Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dryer. Upon researching model ler4634jq0;  you can unplug the dryer power cord and remove the heat element, thermostat, thermal fuse when the dryer is not hot. With the mentioned parts removed you can test the parts for continuity using a multi meter. The parts test should read continuity if the parts are ok, if one of the mentioned parts test reads no continuity then that part may need to be replaced. The mentioned parts work together to make sure that the dryer is successfully heated as needed so when any of the mentioned parts fail it will directly affect the heat.

I trust this information will help you, we appreciate your business thank for choosing Sears.


Read More
CarlosZ -
Sears Technician
August 09, 2015

how to change drive belt LER4634JQ0 Whirlpool Electric dryer


Hello glad to help.  Thank You for choosing Sears

 I am sorry and do understand your frustration when needing help to get the dryer belt on.

Glad to help out.   Im  looking at your Whirlpool model number ler4634jq0.

Instructions to put on belt:

1:  Safety awareness, please unplug the dryer from the wall.   Lift up the lint trap cover on the top of the dryer and take out the lint screen.  Unscrew the 2 screws that secure the lint trap housing and put them in a memorable, safe, place.

2:  Raise the top of the dryer and you can disconnect the door switch wiring harneess.  Take out the screw that secures the dryers front panel which will be on both sides at the top of the front panel.  Then place those screws in a safe place also.  Lift the front panel to remove it from the body of your dryer.

3:   Remove the ol belt and then replace a new belt around the drum/tumbler with the grooves of the belt towards the surface of the drum.  Place a block or something like that underneath the drum to support it while you place the belt into its correct position on the black line that completely goes around the tumber.

4:  Route the drum belt around the drum, around both the idler pulley and the motor pulleys.  When that is in shape you can take out the block underneath that you used to support the drum.

5:  Rotate the drum with your hands to make sure it is ready to go, then just reverse your order and put it all back together.    

 If you have further questions please let me know.

Thanks for choosing Sears

Read More
Larry L -
Sears Technician
November 05, 2013

Is my Whirlpool Dryer Model#LER4634JQ0 trashed or salvagable?


Also, i need to mention that a week ago, a storm caused a power outage. When utility worked on power, we ended up with a brown out. I have used dryer since with no problems 3-4 times since then. Could this have damaged my dryer?

Read More
John -
July 09, 2012

Hi John,

Thank you for submitting a question to Manage My Life.

From your description this was most likely the heating element burning up. I recommend checking the heating element first. Here is a video that shows how to do this on a dryer similar to yours; Video . Always unplug or de-energize electrical equipment before removing covers or attempting service. Be careful and wear appropriate hand protection when working around sharp metal parts. The dryer in this video may not look exactly like yours but the procedure is basically the same. You can visually check the element for damage or here is a video that demonstrates Testing the heating element . This will require the use of an ohm/volt meter.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website; Sears Home Services .

Here is a link that you may use to view the parts list diagram or purchase any parts needed for your appliance; Sears Parts Direct .

I hope this is helpful. Check the things I have covered here and if I may be of further assistance please reply to this post.


Read More
Landell -
Sears Technician
July 12, 2012
See more answers

Top Parts