Model #LER4624BW2 WHIRLPOOL Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

dryer failure 110.86671800

A:

Thank You for choosing Sears PartsDirect.com. I regret to hear that you are having issues with your dryer and do understand your frustration. Glad to help out. Im looking at your model number LER4624BW2 and If the dryer is not heating you could be experiencing an issue with the thermal fuse (3392519), operating thermostat (61894 ), high limit thermostat(341195)and thermostat 660039 . If you have an ohms/volt meter you can test these parts for the proper continuity. To test the parts, disconnect both wires from the components and test them at room temperature. The ohms reading for these components should be zero ohms. If the high limit thermostat is faulty, then replace the thermal cut-off as well and vice versa. They two components work together and come as a kit. If they component listed above test good, then the issue may be with the heating element (4391960 ) and I recommend testing it as well. You'll want to get a reading of 7.8 - 11.8 ohms for it to test good.  I have included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link above to be taken to the page. If you have further questions please resubmit your question for further information.
 
Thanks for choosing Sears PartsDirect.com.


SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others. 

Read More
Sherman_G_Wallace -
Sears Technician
March 25, 2014
A:

Thank You for choosing Sears PartsDirect.com. I regret to hear that you are having issues with your dryer and do understand your frustration. Glad to help out. Im looking at your model number LER4624BW2 and If the dryer is not heating you could be experiencing an issue with the thermal fuse (3392519), operating thermostat (61894 ), high limit thermostat(341195)and thermostat 660039 . If you have an ohms/volt meter you can test these parts for the proper continuity. To test the parts, disconnect both wires from the components and test them at room temperature. The ohms reading for these components should be zero ohms. If the high limit thermostat is faulty, then replace the thermal cut-off as well and vice versa. They two components work together and come as a kit. If they component listed above test good, then the issue may be with the heating element (4391960 ) and I recommend testing it as well. You'll want to get a reading of 7.8 - 11.8 ohms for it to test good.  I have included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link above to be taken to the page. If you have further questions please resubmit your question for further information.
 
Thanks for choosing Sears PartsDirect.com.


SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others. 

Read More
Sherman_G_Wallace -
Sears Technician
March 25, 2014
See more answers
Q:

Heating question LER4624BW2 Whirlpool Electric dryer

A:

Thank You for choosing Sears PartsDirect.com. I regret to hear that you are having issues with your dryer and do understand your frustration. Glad to help out. Im looking at your model number LER4624BW2 and If the dryer is not heating you could be experiencing an issue with the thermal fuse (3392519), operating thermostat (660039), high limit thermostat or the thermal cut-off (kit 3399848) . If you have an ohms/volt meter you can test these parts for the proper continuity. To test the parts, disconnect both wires from the components and test them at room temperature. The ohms reading for these components should be zero ohms. If the high limit thermostat is faulty, then replace the thermal cut-off as well and vice versa. They two components work together and come as a kit. If they component listed above test good, then the issue may be with the heating element (279838 ) and I recommend testing it as well. You'll want to get a reading of 7.8 - 11.8 ohms for it to test good.  I have included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link above to be taken to the page. If you have further questions please resubmit your question for further information.
 
Thanks for choosing Sears PartsDirect.com.


SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others. 

Read More
Sherman_G_Wallace -
Sears Technician
March 11, 2014
Q:

I have a whirlpool dryer model #LER4624BW2.

A:

First check the belt. Most dryers have a switch on the belt which will not allow the unit to run if the belt is off/broken.

Read More
Michael -
August 10, 2013
A:

First check the belt. Most dryers have a switch on the belt which will not allow the unit to run if the belt is off/broken.

Read More
Michael -
August 10, 2013
A:

Thanks for contacting ManageMyLife.com. I understand how frustrating it is having trouble with your dryer not running. We are here to help. Based on the symptom, I suspect the thermal fuse or the door switch is bad on the dryer. Both parts need to be checked with a multimeter. The images below show how to open the dryer to test the parts. The dryer needs to be unplugged when performing a ohm test with a multimeter. I hope this helps.

To order dryer parts, please visit SearsPartsDirect.com with the model number.

If you do not feel comfortable repairing this problem yourself or if it is under warranty, then you can have it repaired at your home by a Sears Technician. You may visit SearsHomeServices.com and follow the instructions, then click on the red next now button.

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Read More
John H -
Sears Technician
August 10, 2013
See more answers

Top Parts