Model #LER3624JQ1 WHIRLPOOL Residential Dryer

  • Top And Console/literature
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

the inside drum will not turn LER3624JQ1 Whirlpool Residential dryer

A:

Not having a properly working dryer can be a big inconvenience, I can understand your concern. Looking on the site myself, I located some information that can helpful from another expert. I have attached the link below. Hope it helps!

Read More
maira -
July 27, 2013
A:

Thank you for using ManageMyLife.com. I am sorry to hear of the spin issue you are experiencing on the dryer, I know how frustrating that can be, especially if the clothes are piling up.

The first thing to check would be the drive system on the unit, chances are the drive belt has broken or come off the drive pulley. Check the pulley for any wear and that it freely spins.

If the drive system checks out with the belt in tact, still on the pulleys, with no visable wear, you will want to check to see if the motor is working. Having a multimeter will be critical for checking the motor.

If you would feel more confident having a Sears Home Service technician help assist with the diagnosis/repair, click here to be directed to the page to set up service.

If you have any further questions or inquiries, please don't hesitate to ask. Thank you for using ManageMyLife.com.

 

Read More
Desirea -
Sears Technician
July 27, 2013
See more answers
Q:

My Whirlpool electric dryer will not start

A:

I understand how important it is for your dryer to be heating properly so that you can dry your clothes without any delay and I will be happy to help. While you are waiting for an expert answer, I did manage to find a link that will provide you with more information about your problem: http://www.managemylife.com/mmh/questions/202737-why-wont-my-whirlpool-dryer-start-1. I hope my link is useful.

Read More
Joseph P. -
November 10, 2010
A:

I understand your concern with your dryer. If the dryer has the correct supply voltage then it could have a failed thermal fuse. The thermal fuse (key#59) is located on the blower housing (key#44) and will have two blue wires attached. Disconnect the power cord and remove the rear panel to access the thermal fuse. The thermal fuse can be disconnected and tested for continuity using an ohm meter.

If you do not have an ohm meter, you can disconnect the two blue wires from the thermal fuse and temporally connect or jump the two blue wires together. Make sure the metal portion of the connectors are not touching any metal before plugging the dryer in and pushing start.

NOTE: If the dyer starts and runs, DO NOT leave the thermal fuse jumped and try to catch up on laundry. Replace the thermal fuse.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
November 11, 2010
A:

i have a whirlpool stackable washer and dryer and have power to the front dials but it wont do anything when i try to start it? thanks joan

Read More
Anonymous -
August 02, 2011
A:

would this also be a thermal fuse /

Read More
Anonymous -
August 02, 2011
A:

Newbie: It may or may not be a faulty thermal fuse preventing your dryer from starting. It could be the door switch, push to start switch or timer. If you could submit your question along with the model number and additional details in a formal question and not on this thread it would be most helpful. Thank you.

Read More
Joey S -
Sears Technician
August 03, 2011
See more answers
Q:

Have a whirlpool dry that doesn't get hot to dry clothes.

A:

Managemylife.com is a great place to find the answers to just about everything.I'm sorry that you are having some difficulties with your dryer. I suggest that you provide key information that will help your expert give the best possible answer.They are the make and model number of the product in question and any insightful data that may shed some light what the cause of the problem might be. This will speed up the process, just click on reply below and provide your information.

Read More
James -
March 12, 2011
A:

This is a problem I can likely help you with but I will need a model number. If no model number is available then the make and location of the lint filter will help.

Please reply with a model number for further assistance.

Read More
Fred M -
Sears Technician
March 12, 2011
A:

its a whirirlpool dryer model #ler3624jq1. can put it on very hot cycle 3 times in a row and clothes won't dry

Read More
scott -
March 15, 2011
A:

The best place to begin with this problem is with a oven/appliance thermostat stuck in the vent at the dryer exhaust. The temperature shoulc cycle from 135 to approximately 150 degrees. You can try this with the vent on and wih the vent off.

Read More
Fred M -
Sears Technician
March 19, 2011
See more answers

Top Parts