Model #LEB6300PW0 WHIRLPOOL Residential Dryer

  • Cabinet Parts
    3 Results
  • Top And Console Parts
    3 Results
  • Bulkhead Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


How do I install the new element in my dryer model LEB6300PW0?


Make sure that you have the dryer unplugged when accessing internal components.

The white wire should have a black stripe on it. This is a wire that connects to the timer so that the timer will advance in the automatic cycle. It will need to be connected to the red wire that goes to the heating element from the high limit thermostat on the side of the element. You may be able to wire this yourself by taking the element to the hardware store and getting a spade that will fit the heater element terminal. Connect both the white/black wire and the red wire coming from the high limit thermostat to one of the connectors on the element. The other terminal on the element will have the red wire coming from the motor centrifugal switch. This should resolve your wiring problem. I provided the wiring diagram for your dryer in the image below with the wires going to the element highlighted.

If you need more help, resubmit your question with additional details.

If you do not feel confident wiring this replacement element yourself, then you can have it installed at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
April 05, 2010

Top Parts