Model #LDF6810ST LG Dishwasher

  • Cabinet Assy
    3 Results
  • Tub Assy
    3 Results
  • Rack Assy
    3 Results
  • Panel / Door Assy
    3 Results
  • Sump Assy
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

dish washer door problem. LDF6810ST Lg Dishwasher

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your dishwasher and I do understand your frustration. Glad to help out. I'm looking at your model number LDF6810ST and from your description I suspect that item f013 may have snapped. This piece with the spring item f011 stops the door from dropping. Here is a link for a video that may help with the repair. I have included a link to our Parts Direct page where you can purchase the part you need to complete your repair. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
January 27, 2015
Q:

LG dishwasher LDF6810ST LDF6810ST-01 Lg Dishwasher

A:

Thank you for choosing SearsPartsDirect.com. I can certainly understand how frustrating it can be when your dishwasher is not drying your dishes. I did look into the model number you have provided, and I have found information to assist you. 

I do see that there is a vent in your dishwasher that could be blocked or broken causing your unit not to heat. 
Click here for the vent. The casing assembly is the motor that directs the heat into and out of the dishwasher. I recommend checking the casing to make sure it is working. Click here for the casing. 

Click here for the service manual. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears’s technician. Here is a link for the website: Sears Home Services.

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
July 25, 2014
Q:

LG dishwasher model LDF6810ST makes snoring noise during wash cycle.

A:

I understand how frustrating this can be. While you are waiting on an expert to answer your question, I found a great link in the ManageMyLife.com website on your problem with your Dishwasher. Click here. Hope this helps!

Read More
Dezeray S -
August 05, 2013
A:

Thank you for your question and I understand your concern.

Based on your symptom, details and fix, the LG dishwasher model LDF6810ST is not likely filling with enough water. A lack of water will cause the pump to cavitate/suck air instead of constantly pumping water through the spray arms. If the dishwasher detergent is causing too much suds, it can also cause it to make the same sound and cavitate.

I suspect the water inlet valve filter screen is restricted. I recommend replacing the water inlet valve assembly. Before connecting the water supply to the new water inlet valve, purge a gallon or so of water into a pan before connecting the water supply back to the new water inlet valve. The water inlet valve assembly for LG dishwasher model is part #5221DD1001A which can be ordered from Searspartsdirect.com

The water inlet valve is located under the front of the dishwasher. You will need to remove the elbow threaded into the old valve and install it on the new valve before connecting the water supply tubing.

This may be the issue. If not, please reply and I will be glad to assist you further. 

 If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services.

Read More
Joey S -
Sears Technician
August 06, 2013
A:

Thanks so much for your response. That is what I thought at first, but I would expect an IE Error (water inlet trouble) which I am not getting. Other posts elsewhere online suggest this is an early symptom of the wash motor going bad, which is a known issue in older LG dishwashers. They recommend replacing the sump assembly with the current part number. What do you think of this?

Read More
Pete -
August 06, 2013
A:

Pete: That could be the case if the dishwasher is getting the proper amount of water. But, like you said, it would generally display an error code if there was an issue with the wash motor. You said by adding some water that it quit making the "snoring" noise and based on adding water, I suspect a lack of water more so than a faulty wash motor. I strongly suggest calling a service technician to diagnose and repair your dishwasher if replacing the water inlet valve does not resolve the "snoring" noise.

Read More
Joey S -
Sears Technician
August 07, 2013
See more answers

Top Parts