Model #LC320SLX SYLVANIA LCD Television

  • Cabinet Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

What can cause the green light to flicker and go out on a Sylvania HD TV?

A:

It sounds like the TV will come up after the circuits have warmed up from trying to be turned on. I would be looking for bloated capacitors based on the fact that you have to try a few times and it will come on. I cannot tell you what you are looking for but there might be some low voltage underrated caps that are getting puffed do to voltage spikes. A technician will know what he is looking for. They are usually found on the power supply itself. There could also be some cracked solder joints that do not make contact until heated.

Read More
David A. - Personal Solutions Manager -
Sears Technician
October 20, 2009
A:

I have Lc 320 SLX the Red lite is on when I try to turn it goes green then back to Red I have replaced main board an the inverter board

Read More
lenny -
February 14, 2015
A:

what is the best thing to do when the green ligt come on flickers and go out

Read More
Felix -
December 24, 2015
See more answers
Q:

MY SET UP KEEPS COMING UP ON THE SCREEN AND THE CHANNELS KEEP CHANGING ON THEIR OWN! WHAT CAN I DO TO STOP THIS? LC320SLX Sylvania Lcd television

A:

Thank You for choosing Sears PartsDirect.com. I regret to hear that you are having issues with your Tv and do understand your frustration.  Glad to help out. Im looking at your model number LC320SLX. I did some research on this issue and it seems like there was a service flash through Sylvania. Please contact  them for further assistance, Customer Service: 800.968.3429
If you have further questions please let me know.
Thanks for choosing Sears PartsDirect.com

Read More
Sherman_G_Wallace -
Sears Technician
November 12, 2013
Q:

television green color screen LC320SLX Sylvania Lcd television

A:

That green color screen can be caused by loose input connections. I recommend that you check all of the component connections. 

 

The green tint can also be caused by interference. Magnetic devices such as speakers can distort the picture tint.

 

A problem with an electronic control board in the TV can also cause this problem. Turn off the TV and unplug it for 5 minutes. This will reset all of the control boards. Plug it back in and see if the problem returns.

 

You may need to check all of your settings for your picture. Here is a link for the owner's manual: Sylvania LCD Television Owner's Manual. 

 

I hope that these tips help. If you need further assistance, reply with additional details. 

Read More
Lyle W -
Sears Technician
October 31, 2013

Top Parts

Top Accessories