Model #LC260SS8 SYLVANIA LCD Television

  • Cabinet Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Why does my television turn off immediately after I turn the television on?

A:

When the Sylvania television will not stay powered on. look at what an expert has to say on a similar issue in the link provided below. Hope this helps. Additional information may take two business days, usually sooner. Thanks for your patience. If you decide on service, that link is also available.

Read More
Anna T -
February 04, 2013
A:

Hello Thomas,

Note: Working on a TV can be difficult and dangerous due to the high voltage circuits inside. Always remember to unplug any TV before trying to service it and if unsure of the proper procedures, seek the service of a trained professional.

I'm sorry to hear that your television is not staying on and I would like to assist you. An issue like you have described is usually an indication that the power supply has failed and cannot maintain the required current to keep the panel backlights lit. It is also possible that the panel has an issue and that it is drawing too much current and causing the power supply to go into shutdown. In either case, this will require a technician to test it thoroughly. I suggest taking it to your nearest Sears Store for a carry-in repair.

Please let me know if you would like any further assistance.

Jerry C

Read More
Jerry C -
Sears Technician
February 05, 2013
See more answers
Q:

have a Sylvania LCD LC260SS8 TV that no longer has a picture or menu but has sound whenever it hooked up to cable or a DVD. If you give the TV a good smack the

A:

"Provide more detailed could get you a better answer from one of the expert". A suggestion I have while you are waiting on an response from an expert. You can visit SearsHomeServices.com website to set service with a Sears technicians. I attached the link below. Hope this helps! Good luck.

Read More
Dezeray S -
October 12, 2010
A:

I am sorry for the long delay. Your TV is still "ON", but the issue can be 2 different problems.

  • To narrow the problem down:
    • you would need to look at the screen. If the screen goes from black when it is off to a gray tint when you tune it on the issue might be able to be fixed by replacing a processing board part number 1ESA14541.
    • The other issue if the screen stays completely black you turn it on, the inverter board part number 1ESA14547 could be the issue, but most likely would be the LCD panel itself. The LCD panel contains the lights for the screen. It is a part that cannot be ordered.

Most common problem for this type of symptom is the LCD panel itself.

Read More
Dusty J -
Sears Technician
October 25, 2010
See more answers

Top Accessories