Model #LAT9457AAM MAYTAG Residential Washers

  • Control Panel
    3 Results
  • Top
    3 Results
  • Cabinet
    3 Results
  • Tub
    3 Results
  • Transmission
    3 Results
  • Base
    3 Results
  • Clutch, Brake & Belts
    3 Results
  • Wiring Information
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Washer Completely Drains But Leaves Clothes Wet

A:

With the washer not properly spinning clothes dry can be concerning. I have done some research on the Manage My Life website and have located a link quite similar to your issue. While you are waiting for a detailed reply from an expert I have provided the link below. Hope this helps!

Read More
Priscilla V -
June 13, 2012
A:

I know that it can be very frustrating to have issues with your Maytag washer. First, I would suggest you make sure that the washer is spinning at the end of the cycle. If it is then the problem could be a brake failure, spin bearing issue, tub seal, motor cradle, or possible a main bearing failure. This is not the easiest washer to work on. It will require a service technician with the experience and knowledge to properly diagnose and repair this Maytag washer. You may want to remove the front panel and manually rotate the transmission pulley in the spin directions and see if there is a lot of friction. If it's hard to turn then I highly recommend calling a service technician to diagnose and repair your Maytag washer.

You can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services . I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
June 13, 2012
See more answers

Top Parts