Model #LAT8606AAE MAYTAG Residential Washers

  • Control Panel (lat8506aae) (lat8506aam) (lat8506abe)
    3 Results
  • Control Panel (lat8606aae) (lat8606aam)
    3 Results
  • Top
    3 Results
  • Cabinet
    3 Results
  • Tub
    3 Results
  • Transmission
    3 Results
  • Base
    3 Results
  • Clutch, Brake & Belts
    3 Results
  • Wiring Information (lat8506aae) (lat8506aam) (lat8506abe)
    3 Results
  • Wiring Information (lat8606aae) (lat8606aam)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Why is the cold water filling so slow on my maytag washer?

A:

It sounds like you are going to need to replace the water valve. First, I would recommend turning the cold water off & removing the fill hose from the washer water valve. Turn the water on in a bucket or inside the washer tub to see how much water pressure you have. If the pressure is good, you will need to replace the water valve. If the pressure is low, take the other end of the hose off the supply faucet & run it in a bucket. If the pressure is good, you will need to replace the fill hose or check if the screens are clogged.

Read More
biker dave -
Sears Technician
October 01, 2008

Top Parts