Model #LAT8416AAE MAYTAG Residential Washers

  • Control Panel
    3 Results
  • Top
    3 Results
  • Cabinet
    3 Results
  • Tub
    3 Results
  • Transmission
    3 Results
  • Base
    3 Results
  • Clutch, Brake & Belts
    3 Results
  • Wiring Information (lat8416aae) (lat8416aam)
    3 Results
  • Wiring Information (lat8426aae) (lat8426aam)
    3 Results
  • Wiring Information (lat8426abe)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

My maytag does not run in ALL cycles

A:

The washer only working in the gentle cycle can be frustrating. I did some research on your model number but was not able to find a solution to fix the washer. Your expert will be able to help answer your question. It may take two business days. I added a link below to Sears Home Services in case you would like to take that route. I do hope that everything works out.

Read More
Marc -
February 13, 2013
A:

Thank you for your question and I understand your concern.

I'm not understanding what is clicking, I will assume you are hearing the timer clicking and you're not hearing the motor clicking on and off rapidly. The motor is a two speed motor, the timer controls what speed the motor will run at.  Based on your symptom, I would suspect a faulty timer and not the motor. Now, it could have loose or bad wire connection at the timer or motor for the high speed motor circuit. 

 The high speed nuetral wire at the motor is black in color and the black wire on timer terminal 36 or it could be labled terminal 6. 

I recommend calling a service technician to properlly diagnose and repair your washer or you could try replacing the timer yourself.  If the new timer does not resolve the issue and there is no loose, broken or burnt wires at the timer or motor, then I would suspect a faulty motor.

If I were you, I would call and schedule a service call and have it properlly diagnosed and repaired.

 If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician.  Here is a link for the website: Sears Home Services ..

 

 

Read More
Joey S -
Sears Technician
February 14, 2013
A:

Thank you for your question and I understand your concern.

I'm not understanding what is clicking, I will assume you are hearing the timer clicking and you're not hearing the motor clicking on and off rapidly. The motor is a two speed motor, the timer controls what speed the motor will run at.  Based on your symptom, I would suspect a faulty timer and not the motor. Now, it could have loose or bad wire connection at the timer or motor for the high speed motor circuit. 

 The high speed nuetral wire at the motor is black in color and the black wire on timer terminal 36 or it could be labled terminal 6. 

I recommend calling a service technician to properlly diagnose and repair your washer or you could try replacing the timer yourself.  If the new timer does not resolve the issue and there is no loose, broken or burnt wires at the timer or motor, then I would suspect a faulty motor.

If I were you, I would call and schedule a service call and have it properlly diagnosed and repaired.

 If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician.  Here is a link for the Sears Home Services.

Read More
Joey S -
Sears Technician
February 14, 2013
See more answers

Top Parts