Model #LAT8004AAE MAYTAG Residential Washers

  • Control Panel
    3 Results
  • Top
    3 Results
  • Cabinet
    3 Results
  • Tub
    3 Results
  • Transmission
    3 Results
  • Base
    3 Results
  • Clutch, Brake & Belts
    3 Results
  • Wiring Information
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Maytag Washer

A:

Sounds like you are working hard to get the machine going. I found a similar question from a previous post that has the expert asking a couple of clarifying questions. Just click on the reply button below to answer, then click submit. You can continue to use the same thread until your washer is fixed.

Read More
Barbara H. -
January 27, 2011
A:

I am not sure it can be fixed now. Just emptied out all the water turned it on again to fill it up with some water as was told and the water will not work now to fill it up. What now

Read More
Diane -
January 27, 2011
A:

Thank you for the follow up information. From what you described it sounds like the lid switch is causing the problem. On this model the lid switch sends power to the watervalve & the motor. If the lid switch fails the motor will not run & if the fuse fails the unit will not fill, both are part of the lid switch on this model of washer. I found a link providing access & replacement of the lid switch for your model. Be sure to disconnect power before attempting to remove any panels.

Please click on the link below. After reading through the instructions please let us know if you have anymore questions or run into problems.

What is wrong with a Maytag model LAT8824AAM washer that will not agitate, spin or drain?

Read More
biker dave -
Sears Technician
January 28, 2011
See more answers

Top Parts