Model #LA6058XSW2 WHIRLPOOL Washers

  • Front Cover
    3 Results
  • Top And Cabinet
    3 Results
  • 3 Results
  • Miscellaneous
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Water System
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness
    3 Results
  • Brake And Drive Tube
    3 Results
  • Gearcase
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

whirlpool washing machine wont run and just makes humming sound

A:

I know how important it is to have a good working washer in the home so that you can keep your clothes nice and clean. I am sorry for the inconvenience and I suggest you add to the thread of this question and include the full model number of your washer so that the expert can provide you with a more detailed answer. I did manage to find a link with a similar question. I hope this helps while you wait for your expert response.

Read More
Joseph P. -
June 30, 2012
A:

Thank you for submitting a question to Manage My Life.

Without your model number I am only able to give you general information. From your description you most likely have a clog in your drain pump or the drain pump is seized up. Since I do not know if this is a top load or a front load, I cannot give you specific information on how to gain access to the drain pump. Always unplug or de-energize electrical equipment before removing covers or attempting service. Be careful and wear appropriate hand protection when working around sharp metal parts.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website; Sears Home Services .

Here is a link that you may use to view the parts list diagram or purchase any parts needed for your appliance; Sears Parts Direct .

If you would like specific help with your washer, please include the model number and more details in a reply to this post. The model number should be located inside the loading door or on the back panel.

Landell

Read More
Landell -
Sears Technician
July 02, 2012
A:

Its a top loading Whirlpool LA6058XSW2. Serial number C84493214

Read More
mark -
July 03, 2012
A:

Mark,

Thank you for the model number. The first thing I recommend checking is the drain pump. I am including a video below that demonstrates gaining access to the drain pump on a washer like yours. Always unplug or de-energize electrical equipment before removing covers or attempting service. Be careful and wear appropriate hand protection when working around sharp metal parts. The washer in this video may not look exactly like yours but the procedure is basically the same.

Make sure the drain pump and drain hoses are clear and that the drain pump is free of foreign objects. Ensure that the drain impeller moves and you do not feel a grinding sensation when it moves.

I hope this is helpful. Check the things I have covered here and if I may be of further assistance please reply to this post.

Landell

Read More
Landell -
Sears Technician
July 05, 2012
See more answers

Top Parts