Model #KUIS18NNTS0 KITCHENAID Freestanding Icemaker

  • Cabinet Liner And Door Parts
    3 Results
  • Evaporator, Ice Cutter Grid And Water Parts
    3 Results
  • Pump Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Unit Parts, Optional Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

KitcheAid ice maker model # KUIS18NNTS0. Trying to change out the thermistor. Can someone tell me where it is located.

A:

Thank You for choosing Sears PartsDirect.com. I regret to hear that you are having issues with your icemaker and do understand your frustration. and do understand your frustration. I have included a link that shows the themistor in the control panel. Thermistor part number 2313635.

I have included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link below to be taken to the page.

If you have further questions please let me know.
Thanks for choosing Sears PartsDirect.com

http://www.searspartsdirect.com/partsdirect/part-model/Kitchenaid-Parts/Ice-maker-Parts/Model-KUIS18NNTS0/0593/0164160/W0705053/00004?blt=06&prst=0&shdMod=KUIS18NNTS0

Read More
Sherman_G_Wallace -
Sears Technician
November 04, 2013
Q:

Model #KUIS18NNTS0 Ice maker - freestanding KUIS18NNTS0 Kitchenaid Ice maker - freestanding

A:

Thank You for contacting ManageMyLife.com

I understand your concern with your ice maker constantly over flowing. After researching your model I show the Ice Bin Thermister is the component that controls ice production. The part tells the control panel when the bin is full.

I have included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link below to be taken to the page.

Ice Bin Thermister for Model KUIS18NNTS0

If you need further assistance please let me know.

Thanks for using ManageMyLife.com

Read More
Desirea -
Sears Technician
October 27, 2013
Q:

Ice Maker Leak. Need to replace "Complete Water Valve" part which is source of leak

A:

Repairs can be tricky without the right information. While you wait for the expert answer you may wish to check out the owner's manual and a web site that may get you started. I attached the links below. Hope this helps!

Read More
Barbara H. -
August 06, 2010
A:

The trick to removing the water lines is to push in on the locking collar & then pull out the hose, do not force. Please see the image provided below for more details.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
biker dave -
Sears Technician
August 06, 2010
See more answers

Top Parts