Model #KUDT03FTBL0 KITCHENAID Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm And Strainer Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill, Drain, And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Lower Rack Parts
    3 Results
  • Third Level Rack And Track Parts, Optional Parts (not
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

WHY ISN'T WATER GOING INTO MY KITCHENAID DISHWASHER MODEL # KUDT03FTBL0?

A:

If the dishwasher door is not fully closed and latched, the dishwasher will not start and will not fill. Open the door and make sure there are not any dishes, pots, handles or utensils that are stopping the door from fully closing.

After making sure the door closes properly and nothing is under the float valve, close the door and press the Start button, to restart the cycle. If the dishwasher still will not fill make sure there is power to the dishwasher.

If this is a new installation, make sure that the water valve is turned to the "ON" position; otherwise no water will enter the dishwasher.

Read More
Jerome G. - Personal Solutions Manager -
Sears Technician
March 03, 2010

Top Parts