Model #KUDS01ILWH2 KITCHENAID Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm And Strainer Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Lower Rack Parts
    3 Results
  • Miscellaneous Parts Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

normal mode light and my add a dish light are blinking and the dishwasher wont start even after I open and close the door. its a kitchenaid superba dishwasher

A:

I understand how inconvenient it is to have a dishwasher that is not working properly. While you are waiting for an expert answer, I did manage to find a link that will give you an idea of what might be causing the lights to blink. I hope my link is useful.

Read More
Joseph P. -
September 14, 2010
A:

From the description you give I believe I would start by checking the door switches for continuity with an ohm meter.

If you can't change cycles or options then it's possible the problem is a stuck or shorted keypad.

If the door switches check okay and you can change cycles and options then next I suggest you enter and run a diagnostic test.

If you cannot enter the test and cycles and options can't be changed then most likely the console has a stuck or shorted keypad.

You can reply with any additional details for further assistance.

Read More
Fred M -
Sears Technician
September 15, 2010
See more answers

Top Parts