Model #KUDS01ILWH1 KITCHENAID Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm And Strainer Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Lower Rack Parts
    3 Results
  • Miscellaneous Parts Optional Parts (not Included)
    3 Results
Find part by diagram >


Error Codes

Error Code:



Question and Answers


What is wrong with my Kitchen Aid model KUDS01ILWH1 dishwasher when the water comes in but then just hums?


From the description of your problem the most likely cause of this is the impeller in the sump is jammed. The dishwasher has a separate drain motor and that's why it will drain but not circulate the water.

I'd recommend you access the sump and check for obstructions that might cause the motor not to turn.

It can be a bad motor but more likely a toothpick, bone or something else has jammed the impeller.

The image below contains the information on how to access the sump and check for obstructions.

If there are no obstructions then the motor will most likely have to be replaced for this problem.

The 2nd image shows how to remove the motor if you end up needing to replace the motor or impeller.

I hope this information helps to resolve the problem but if any other questions come up then submit another question with any additional details for further assistance with this problem.

Read More
Fred M -
Sears Technician
July 03, 2009

Top Parts