Model #KUDS01DJSB0 KITCHENAID Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm And Strainer Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Lower Rack Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Miscellaneous Parts Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Why isn't dishwasher filling with water?

A:

A Dishwasher is definitely something we depend and when starts malfunctioning it can be a big inconvenience. I have attached some links below that give great information on way this may be happening. Have a nice day!

Read More
Dezeray -
May 30, 2012
A:

Thank you for submitting your question and I will be happy to assist you. First, make sure the float (key #15) in the bottom front corner of the dishwasher isn't stuck in the "up" position. If it is the dishwasher will not fill. In order to diagnose the failure, will require removing the kick plate/toe panel and testing the water inlet valve for resistance. The water inlet valve (key #3) should have a resistance measurement of 890-1090 ohms when measuring across the terminals of the valve with the wires disconnected. If it tests okay, then you will need to check the voltage supply to the water inlet valve when the dishwasher has been started and calling for fill. If there is no voltage present at the water inlet valve then check the voltage supply at the overflow protection switch and check the switch to see if it's opening and closing. You can disconnect the float switch and check for continuity with the ohm meter. Note : Always unplug or de-energize electrical equipment before removing covers or attempting service. Be careful and wear appropriate hand protection when working around sharp metal parts. If you do not feel comfortable performing test or repairing this problem yourself, I recommend scheduling for service. You can schedule for service online with out Sears Home Services team. Please let me know if you require more assistance. I hope this helps. Thank you for choosing Manage My Life.

Read More
Tykara -
Sears Technician
May 31, 2012
See more answers

Top Parts