Model #KUDR01TJBL0 KITCHENAID Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm And Strainer Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Lower Rack Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Miscellaneous Parts Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

want to change the heating element why do i need the circut board KUDR01TJBL0 Kitchenaid Dishwasher

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about your Kitchenaid dishwasher model KUDR01TJBL0. I am so sorry the heating element needs to be replaced. In this case the manufacturer has improved the heater element. The shape of the element has been changed and the new element is a higher wattage. The higher wattage requires a different electronic control. The new electronic control pulses the element on and off during the cycle and the old control board cannot do this. The new parts should shorten the wash and dry cycles and may change the time displayed for the cycle. 

I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 
 

Read More
Rachel Morgan -
Sears Technician
June 02, 2015
Q:

lack of water at top spray arms, running louder than normal KUDR01TJBL0 Kitchenaid Dishwasher

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 09, 2014
Q:

Remove lower spray arm KUDR01TJBL0 Kitchenaid Dishwasher

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Alina -
March 23, 2013
A:

Thank you for your question and I understand your concern.

The thumb screw is part of the lower hub and it will not unthread or come out.

To remove the lower spray arm: 

 

 

  1. Hold the lower spray arm to keep it from rotating.  
  2. Turn the thumb screw clockwise (CW) and the spray arm will thread off the spray arm support. 
  3. The spray arm support has left hand threads. DO NOT TURN IT COUNTER CLOCKWISE (CCW). The spray arm support will remain attached after removing the spray arm.
Or you can do it this way, use a pair of pliers and hold the thump screw stationary, and rotate the spray arm counter clockwise (CCW). 

 

 I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post. 

 

Read More
Joey S -
Sears Technician
March 25, 2013
See more answers

Top Parts