Model #KUDI01FLBL3 KITCHENAID Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm And Strainer Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Lower Rack Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

I need to order a spring for my dishwasher door

A:

It great to know you want to take care of the issue with the door on the Kitchenaid dishwasher as soon as possible. Just click on the first link provided below and type in your model number and your on your way. If you decide not to install the spring yourself, the link for service is also available. Good luck.

Read More
Anna T -
November 14, 2012
A:

First I suggest you pull the dishwasher out from under the counter to verify the spring is broken. There is also a rope that is more likely broken. The rope and spring are circled in the image below. I would suspect the water line, drain hose and electrical line will have enough slack to pull the dishwasher out without disconnecting any of the lines. Remember to turn the power off first. I hope this helps. Let me know if I can be or further assistance.

Read More
Fred M -
Sears Technician
November 14, 2012
See more answers
Q:

My disher wont drain .

A:

Trying to understand a dishwasher can sometimes be complicated. I researched your question and found someone wanted to know how to install their dishwasher this is irrelevant to your question but the expert answer will help. He provides the instillation manual that will assist you with your problem. If this is of no assistance an expert will respond shortly. I hope this helps!

Read More
Jacqueline S -
September 16, 2010
A:

You give a good description of the problem but you don't mention where the drain hose is hooked up. Is it hooked up to a garbage disposal or to the drain line itself. From the description you give the problem would be with the drain line or disposal.

If it is hooked up to a disposal make sure the plug in the disposal was knocked out. Try to stick a screwdriver though the disposal nozzle where the drain hose attaches.

If the dishwasher drains okay as long of the hose is disconnected then the restriction would have to be where the hose is hooked up.

Try checking the above and reply with any additional details for further assistance.

Read More
Fred M -
Sears Technician
September 17, 2010
A:

I figured out what was preventing the dishwasher from draining. The drain hose was made from clear (see thru) plastic except for the ell where it connected to the drain pump housing. The ell was red in color and had a defective check valve inside it. Thanks for the responses.

Read More
bamboozled -
September 17, 2010
See more answers

Top Parts