Model #KUDI01DLSS6 KITCHENAID Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm And Strainer Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Lower Rack Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

My KitchenAid dishwasher stopped working mid cycle, water still in bottom, no buttons work, no indicator lights work?

A:

We become very reliant on our dishwashers and when it does not complete the job we have to. While you wait for the expert to review this model you can check a previous post with a similar question if you wish that I attached below.

Read More
Barbara H. -
August 05, 2011
A:

Check for a light switch beside the sink that may control power to the dishwasher. If you find a light switch for the dishwasher and it is off, then it could be causing your problem. Also check the house circuit breaker for the dishwasher. If you find no problems with those issues, then you could have a blown thermal fuse (part 8193762) in the console. The procedure for replacing that fuse is shown in the first image below. The second image shows how to open the console on this type of dishwasher. I recommend that you shut off the house circuit breaker for the dishwasher and check that fuse for continuity. Here is a link for a brief video that shows how to test a thermal fuse using a volt/ohm meter: Video: Thermal Fuse Testing . If that fuse is blown, you can order a new one from the Sears PartsDirect website. Use the information shown below to replace that component. Be sure that you have the house circuit breaker for the dishwasher shut off when accessing internal components.

If the thermal fuse is not blown, you could have a voltage supply problem, wiring failure or a bad electronic control board in the console.

If you need more help, reply with additional details.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
August 08, 2011
See more answers

Top Parts