Model #KUDH03DTSS3 KITCHENAID Dishwasher

  • Front Panel Parts
    3 Results
  • Tub Parts
    3 Results
  • Wash System Parts
    3 Results
  • Upper And Lower Dishrack Parts
    3 Results
  • Frame And Lid Parts
    3 Results
  • Accessory Parts
    3 Results
Find part by diagram >


Error Codes

Error Code:



Question and Answers




The dishwasher drawer not allowing the cycle to finish can put a stop to your dishes getting cleaned and I will be happy to help. I am adding a link below that describes a similar question. I hope this helps while you wait for your expert response.

Read More
Joseph P. -
January 23, 2012

You could have hoses that are pushing the drawer out or you could have a problem with that lid assembly. The images below show information on removing the drawer and accessing components inside that cabinet. You may be able to shut off the house circuit breaker for the dishwasher and check those components yourself using the information shown below. The hoses could be twisted. If the drawer was removed during previous service and it was not rotated back to the original position properly, then the hoses could be causing your problem.

These issues are somewhat difficult to check unless you are familiar with servicing this type of dishwasher. If you get to a point where you need to have a service technician examine the dishwasher and correct this problem, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
January 25, 2012
See more answers

Top Parts