Model #KSSP42QMS02 KITCHENAID Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Cabinet Trim Parts
    3 Results
  • Freezer Shelf Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Top Grille And Unit Cover Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner And Air Flow Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser And Front Parts
    3 Results
  • Upper Unit Parts
    3 Results
  • Lower Unit And Tube Parts
    3 Results
  • Icemaker Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

What is the part number for my freezer light bulb cover?

A:

Replacement light covers to match the refrigerator often means sticking with original factory parts. The expert will review this model and respond from their resources. Another option if needed is to contact KitchenAid directly at the phone number listed in the owner's manual. See bottom of page 18. I hope this information helps if needed.

Read More
Barbara H. -
April 29, 2012
A:

Thank you for submitting your question and I will be happy to assist you. I was able to find the part you're looking for off of www.searspartsdirect.com . The cover is found in the "freezer liner" part schematic. Your light bulb cover (key #24) is part number 2259367 priced at $18.77. I hope this information assists you. Thank you for choosing Manage My Life.

Read More
Tykara -
Sears Technician
April 30, 2012
A:

OK thanks I see the part now, that's the part I need. I will order it.

Read More
Pete -
April 30, 2012
See more answers
Q:

How do I install ice and water dispenser arms on KitchenAid KSSP42QMS02?

A:

I understand that you want to install your ice and water dispenser on your Kitchen Aide refrigerator. I have taken some time to research your question here on the Manage My Life website and I noticed that someone else had asked a similar question with a posted response from an expert. I attached the link below if you are interested in viewing. I hope the link that I provided can give you some guidance.

Read More
Alina F. -
February 03, 2011
A:

Thank you for your question.

I should be able to help you with replacing the paddles in the dispenser. The first image shows the break down of the dispenser assembly. The second image shows how to remove the cover of the dispenser. Once the cover is removed, make a diagram of the wire connections if you need to remove them. After the cover is out of the way, remove the switch holder. It has two screw in the lower corners. Hold the switch holder out of the way and remove the screw in between the two paddles. Replace the paddles and reassemble in the reverse order.

Please let me know if you need further assistance on this matter.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
February 04, 2011
See more answers

Top Parts