Model #KSRK25FVMK01 KITCHENAID Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers

Q:

Kitchen aid water filter on refridgerator won't go back into place. Mdel # ksrk25fvmk01. Replacing filter, can't get the new filter to lock in.

A:

I know how great it can be to enjoy a nice cup of purified water out of your refrigerator and although the water filter is not properly inserting I will be happy to help. While you are waiting for an expert answer, I did manage to find a link that will provide you with some tips about what may be causing your problem. Please keep in mind that the link is about a different model than the one you own so the part numbers will be different, I hope my link is useful.

Read More
Joseph P. -
March 10, 2011
A:

I'm sorry you are having this problem. The information you have received is good but it does not pertain to this model. If the eject button is broken, there is no fix for it. The filter housing # W10121138 will need to be replaced. It's available at SearsPartsDirect . If you would like more assistance, any additional details will be helpful and I will be glad to assist you further. Thank you for using Manage My Life.

Read More
Scott D -
Sears Technician
March 11, 2011
A:

Thanks for responding. So do I need to purchase both an eject button and housing. Or do you believe the housing is just bad. Can you provide me with assistance on how to replace housing and eject button (if necessary). Is this simple to replace. thanks again.

Read More
steve -
March 11, 2011
A:

The ejector button is not a separate part, it's part of the housing. To replace the housing, first disconnect power from the unit and shut the water supply valve off. Pull the unit away from the wall far enough to remove the back panel cover. With the cover off, you will be able to see the water lines that connect to the filter housing. Remove these lines and pay attention to which side they connect to. I'm sending a picture of how the fittings on this housing work. To remove the housing you will need to remove the bottom front grill. Remove the 2 screws holding the filter in place and it will pull out. It may be tight but it will pull out. Reverse the procedure to replace the housing. I hope this helps you. If you would like to have a technician make this repair, you can call 1-800-469-4663 to schedule a tech to come out.

Read More
Scott D -
Sears Technician
March 11, 2011
See more answers

Top Parts