Model #KSRG25FTST01 KITCHENAID Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers

Q:

How can I prevent ice from building up in the ice chute?

A:

For starters the freezer temperature is too cold, which can lead to this problem. Ideal freezer temperature is 0-5 F degrees. To properly check the temperature, place a thermometer between some packages (air temperature is not a good check). Another possibility is the chute door may not be closing good all the time. A good check for this is, to shine a flashlight inside the chute and check for light coming out of the door. If you see light, the dispenser door will need to be replaced. If you need assistance, you can resubmit your question with more details.

Read More
Scott D -
Sears Technician
September 18, 2009
A:

i have exactly the same problem, i just checked and the chute door is definitely not closing properly, my refrigerator is a Kenmore model # 10657943700 and serial # HRU2155973 how can I replace the dispenser door?

Read More
Jairo -
May 18, 2012
See more answers
Q:

How can I prevent ice from building up in the ice chute?

A:

First make sure the chute door is closing good. If it isn't, then it will need to be replaced. Also check the temperature in the freezer. If it gets too cold (below zero degrees) this type of problem can occur. The best way to check the temperature is, to place a thermometer between some packages (air temperature is not a good check). Also if you use mainly crushed ice, the chipped particles of ice will build up in the chute. Use cubed ice to flush it out periodically. If the problem still exists, a technician may be needed to check it. If you need more assistance, you can resubmit your question with more details.

Read More
Scott D -
Sears Technician
September 16, 2009
Q:

How can I find information about removing door parts for the ice dispenser on my side by side KitchenAid refrigerator?

A:

Depending on your particular model, the procedure in the illustration below may help you disassemble the dispenser to a point where you can access the ice door and replace it. If not, you will need to resubmit your question with the full model number of your KitchenAid refrigerator for more accurate help with this repair.

The model number of your refrigerator should be on the right side wall at the top of the inside of the fresh food compartment.

Read More
Lyle W -
Sears Technician
August 15, 2008
A:

Thank you for your respond very helpful The model # is KSRG25FTST01 KitchenAid.

Read More
patoune -
August 15, 2008
A:

Thank you for your respond very helpful The model # is KSRG25FTST01 KitchenAid.

Read More
patoune -
August 15, 2008
See more answers

Top Parts