Model #KHWS01PWH0 KITCHENAID Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Dispenser Parts
    3 Results
  • Tub And Basket Parts
    3 Results
  • Pump And Motor Parts, Optional Parts (not Included)
    3 Results
  • Pedestal Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers


Kitchen Aid Washer F11 Error KHWS01PWH0 Kitchenaid Residential washer


Thank you for choosing and being a valued member.  I can certainly understand how frustrating it can be when your washer displays an error code.

 I have found that the F11 code means there is a serial communication error. 

Possible Causes / Procedure
1. Unplug washer or disconnect power.
2. Check wire harness connections to the MCU, the motor, andCentral Control Unit (CCU).
3. Check the drive system for any worn or failed components.
4. Plug in washer or reconnect power.
5. Verify CCU operation by running a Diagnostic test or any
6. Check the MCU by looking for operations of the drive motor.
7. Check the drive motor for powered rotations.
8. Check that the serial harness at the MCU is not mounted
upside down. The wires should be to the left when facing the MCU connectors.

C:03 means fill by hot water inlet valve. Need to check hot water valve. 

This sounds like a wiring issue, in which, should be checked and diagnosed by a service technician. 

You can also visit for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
October 28, 2014

Top Parts