Model #KGRT607HWH8 KITCHENAID Free Standing, Gas

  • Cooktop/literature
    3 Results
  • Cooktop Burner
    3 Results
  • Control Panel
    3 Results
  • Door And Drawer
    3 Results
  • Oven Chassis
    3 Results
  • Broiler And Oven Burner
    3 Results
  • Oven
    3 Results
  • Rear Chassis
    3 Results
Find part by diagram >

Question and Answers

Q:

KGRT607HWH8 Kitchen Aid Gas range error code

A:

Understanding our appliances codes can be challenging. Normally I find the codes for my appliance in the owner's manual. I found the link to your model and attached below. I also found some information about this code on a web site that you can check if you like. It may help while you wait for the expert answer. Hope this helps!

Read More
Barbara H. -
August 22, 2010
A:

I provided a portion of the tech sheet that shows the error codes listed below. The F7E0 indicates a problem with the oven door latch switch. This could be caused by a bad door latch switch or a failed control board. I provided a wiring diagram in the second image below that shows the latch switch circuit. If you shut off the breaker and check the circuit traced in red, you may be able to determine whether the control board is bad. It may be difficult if you are seeing an intermittent problem. If you find continuity through the circuit (measure near zero ohms) then the switch is bad and will need to be replaced. If the circuit is open (measure Ol -- open load or infinite resistance) then the control board is apparently bad.

If you need more help, submit additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
August 24, 2010
See more answers

Recommended maintenance parts & accessories

Show 3 more
No more item to show