Model #KESC307HBS6 KITCHENAID Slide-In Range, Electric

  • Cooktop/literature
    3 Results
  • Control Panel
    3 Results
  • Door & Drawer
    3 Results
  • Oven Chassis
    3 Results
  • Oven
    3 Results
  • Rear Chassis
    3 Results
  • Hidden Bake
    3 Results
Find part by diagram >

Question and Answers

Q:

Model # KESC307HBS6: Are there instructions on how to replace the glass pane located on the inside of the oven door? Thank you for your time!

A:

I'm sorry that you are having some difficulties with your Oven door's glass. I did a little research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices.com. I hope these links will help until your expert can respond.

Read More
James -
May 31, 2011
A:

There are not specific instructions available for that repair. You may be able to replace that glass yourself. First, you will need to remove the oven door from the range as shown in the first image. Those instructions are from the owner's manual for this range. The second image shows the parts list diagram for the door. You will need to use that document as a guide to access that broken glass. After removing the oven door from the range, lay it on a padded surface (on top of a towel). Be careful when removing that oven door, it is heavy. You will probably need to remove screws from the bottom trim and possibly some top and side screws. Rely on your personal observation of the door and that parts diagram to access that glass.

Be sure that you reassemble the door properly.

This can sometimes be a difficult repair to complete. If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
June 01, 2011
See more answers
Q:

Cannot find where some parts go on my kitchen aid range; model KESC307, HBS6, serial no IMM1085, type 30P

A:

I know how important it is to install a major part on your range so that you can go back to cooking some great meals and I will be happy to help. While you are waiting for an expert answer, I did manage to find a good link to help you with your project. I hope my link is useful.

Read More
Joseph P. -
March 08, 2011
A:

The image below shows support brackets that seem to match the components that you are describing. If they do, you can check to see if those tension brackets are in place using the information shown below. Be sure that you shut off the house circuit breaker for the range before accessing internal components.

If you need more help, reply with additional details and we will try to assist you further.

Read More
Lyle W -
Sears Technician
March 09, 2011
See more answers

Top Parts