Model #KESA907PSS00 KITCHENAID Slide-In Range, Electric

  • Cooktop Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Oven Parts
    3 Results
  • Door And Drawer Parts
    3 Results
  • Internal Oven Parts
    3 Results
  • Top Venting Parts, Optional Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

KithcenAid Slide-In Range Electric Model (KESA907PSS00) Step by Step to Access and Replace a Surface Heating Element Part Number 8523696 KESA907PSS00 Kitchenaid Slide-in range - electric

A:

Thank you for choosing Sears Parts Direct. I can certainly assist you in locating the instructions to install the element on your range. I did look into the model number you have provided, and I have found information to assist you. 

I have attached the instructions to get to the elements. 

Click here for the instructions. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
August 05, 2014
A:

Hi Natasha; Thanks so much for the reply; sadly, I cannot open the link you attached for repair instructions, and the image attached is is tiny and when you try to blow it up it becomes completely pixellated and is not usable. If you could repost the link and make sure it works on your end and also send a high quality image that I can blow up without pixellation, that would be great. I noticed this with the other repair responses also and am wondering if it is a Macintosh or PC issue. Thanks Paul

Read More
Paul -
August 05, 2014
See more answers
Q:

I need to install an infinite switch for Model #KESA907PSS00 Kitchenaid Slide-in range - electric I purchase a new one from Sears.

A:

Managemylife.com is always a great resource to find the answers to just about anything. I know this information can be very helpful for you to have. While you have been waiting for your expert to respond, I did some research but I was unable to locate information that would be helpful with regards to your question at this time. Your expert will be answering you within two business days but usually sooner. If you decide on service, that link is provided below.

Read More
Anna T -
January 08, 2013
A:

That part number W10307362 appears to be a kit that includes a complete new set of infinite switches and the wire harness for the surface elements. It should have included the instruction sheet that is displayed in the first 2 images below. The third image shows the wiring diagram for the cooktop portion of the range. That information should help you complete this repair if you are confident that you can install those parts yourself. Be sure that you unplug the range before accessing internal components.

This can be a difficult repair to complete since the switches and the wire harness need to be replaced. If you get to the point where you need to have a service technician install that kit, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
January 10, 2013
A:

Here are the images.

Read More
Lyle W -
Sears Technician
January 10, 2013
See more answers
Q:

My Kitchenaid Cooktop oven, Model # KESA907PSS00, needs to have the glass cooktop replaced. I have the new glasstop for it, but am unsure where to start. Help p

A:

Replacing a cook top isn't a job that requires a technician. While your waiting on an expert response I have provided you with a couple links that may help you understand how complex replacing the glass cook top may or may not be. I attached the links below. I hope these links give you good information.

Read More
Jackie S -
March 07, 2011
A:

I am sending you some images with instructions for removing the control panel and the cooktop glass. You need to remove the control panel to access the cooktop.

The foam tape is used to hold the new cooktop in place. You will see it when you have the glass removed. You will have to pry the old glass out with a putty knife where the tape is used.

Read More
Jimmy K -
Sears Technician
March 07, 2011
See more answers

Top Parts