Model #KERC607EWH2 KITCHENAID Free Standing, Electric

  • Cooktop
    3 Results
  • Control Panel
    3 Results
  • Door And Drawer
    3 Results
  • Oven Chassis
    3 Results
  • Oven
    3 Results
  • Rear Chassis
    3 Results
Find part by diagram >

Question and Answers

Q:

"I have Kitchenaid electric range model #KERC607EWH2 and the oven is not working. I get an error code of F2-E5.

A:

Managemylife.com is always a great resource to find the answers to just about anything. I know this information can be very helpful for you to have. While you have been waiting for your expert to respond, I did some research but I was unable to locate information that would be helpful with regards to your question at this time. Your expert will be answering you within two business days but usually sooner. If you decide on service, that link is provided below.

Read More
Anna T -
January 18, 2013
A:

Error codes are not user friendly. I understand how hard it can be to find an answer. F2-E5 indicates a Cancel Key Line Open . Disconnect power to the range. Check the connection between the touch pad (keypad) and control board (clock) to make sure it is secure. Reconnect power. Select the 'cancel' function and wait 60 seconds. If error code reappears then replace the touch pad, or touch pad and control board (clock) if all one assembly. Parts can be ordered here; Sears Parts Direct . Please reply if further assistance is needed. Thank you for using Manage My Life.

Read More
Barbara H. -
Sears Technician
January 20, 2013
See more answers
Q:

Convection fan not working.

A:

I understand how it can be frustrating with having the fan on your Range not working. I have taken the time to research on the Manage My Life website and have located a link that you may find useful. While you are waiting for a detailed reply from an expert I have attached the link below. Hope this works!!

Read More
Priscilla V -
September 13, 2011
A:

The image below shows the wiring diagram for this range with that convection fan motor circuit traced in blue. You can shut off the house circuit breaker and check the wiring connection using that information. If you do not find a wiring failure in that circuit, then the control board is probably bad. I did verify that the control board is no longer available and that there is no manufacturer authorized substitute part for that control board. You would need to replace the range to fix this problem in that situation.

I you decide to replace the range, you can view new models on the Sears.com website.

If you need more help, let us know.

Read More
Lyle W -
Sears Technician
September 14, 2011
See more answers
Q:

Where can I find directions on replacing the cook top on a KitchenAid range model KERC607EWH2?

A:

The image below shows the procedure for replacing the glass cook top on this type of KitchenAid range. Your model may look slightly different, but the basic procedure should be the same. Be sure that you shut off the breaker to disconnect electrical power before beginning this procedure.

Read More
Lyle W -
Sears Technician