Model #KERC507HBS3 KITCHENAID Free Standing, Electric

  • Cooktop/literature
    3 Results
  • Control Panel
    3 Results
  • Door And Drawer
    3 Results
  • Oven Chassis
    3 Results
  • Oven
    3 Results
  • Rear Chassis
    3 Results
  • Hidden Bake
    3 Results
Find part by diagram >

Question and Answers

Q:

How to replace glass cooktop on Kitchenaid model # KERC507HBS3 KERC507HBS3 Kitchenaid Electric range

A:

Thank you for your inquiry on your Kitchenaid Range, Model: KERC507HBS3. From reviewing the details on your model,I have provided a link to a couple of videos on similar model of ranges, which will advise you on the replacement of the cooktop. The link is found below.  

Click Here

Safety Warning: Before beginning the repair, disconnect the direct power supply to the dryer to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
April 07, 2015
Q:

Kitchen stove

A:

Appliances have many codes and alarms to warn us of a problem.The initial error code may have given the best clue, but the expert should be able to help. If it turns out this is something that you need an experienced technician to repair, an option is to visit Sears Home Services and use the handy scheduler. I'm sure with a little TLC your range should last more years to come.

Read More
Barbara H. -
January 07, 2011
A:

When the range is beeping and will not stop as you are describing, it likely detected a component problem and displayed an error code. The image below shows the information on error codes. You can press and hold the "0" for 5 deliberate seconds and see if you get the F0 in the display. If the display shows an error code, you can refer to the chart below to determine the problem that was detected.

If no error codes are displayed, you could have a bad electronic control board in the range. I recommend that you have a service technician diagnose and repair this type of problem. Here is a link for the Sears Service website: Sears Home Services .

A repair call normally costs around $130. Parts would be extra. If the control board (part 8190681) needs to be replaced, that component costs around $350.

I understand your concern about this KitchenAid range having a problem when it is only 9 years old. This type of range will normally last at least 12 years as you indicated. There is a chance for earlier failure with any appliance that uses electro-mechanical parts.

If you want to conduct some more troubleshooting and try to fix this problem yourself, I recommend that you reply with the error code and any additional details that might help us understand this failure. Based on the model number that you provided, I suspect that you have KitchenAid range model KERC507HBS3 (the second to the last digit is an "S" instead of a number "5").

Read More
Lyle W -
Sears Technician
January 10, 2011
See more answers