Model #KERA205PBL4 KITCHENAID Free Standing, Electric

  • Cooktop Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Chassis Parts
    3 Results
  • Door Parts
    3 Results
  • Drawer & Broiler Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers


Question about a KERA205PBL4 electric range


I completely understand your need for some type of instructions on how to properly replace the broiler element on your electric range. While you are waiting for your expert answer, I did some research on the unit. At this time, I was unable to locate information that would be helpful in regards to your question. Some of these questions that are asked will need specific research and will be answered by an expert with-in two business days but usually sooner.

Read More
Julio -
February 25, 2013

Thank you for your question. Replacing a broil element is really not very difficult. First disconnect power to the range. Now remove the screws holding the element. There will be screws in the back and also a support with screws in the top supporting the front of the element.  Pull the element out far enough to access the terminals and disconnect the wires from the terminals. You can now remove the old element. Now connect the wires on the new element and slide the element back in place and secure it with the front top support and screws. I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.  

Read More
Scott D -
Sears Technician
February 27, 2013
See more answers

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show