Model #KEBC107KSS05 KITCHENAID Built-In Oven, Electric

  • Oven Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Internal Oven Parts
    3 Results
  • Oven Door Parts
    3 Results
  • Top Venting Parts, Optional Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

KitchenAid oven won't keep temperature

A:

I can understand your concern when you are trying to bake something in the Kitchenaid oven and the temperature is not correct. I am providing a link on a similar issue which may be helpful while an expert responds with model number specific information.  Please re-verify the model number to get the best possible answer.  Additional information may take two business days.

Read More
Anna T -
May 17, 2013
A:

Thanks for contacting manage my life about your oven; I will be glad to assist you. The model number you provided KEB107KSS05 does not seem to be correct as I cannot retrieve any data with that number. Please re-inspect the model number and reply with the complete model number off the range/oven. Based on the description I would suspect the temperature probe or the control may be your problem, however I would not take any action before sending the correct model number so I can reply with more accurately If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services.Ron H.

Read More
Ron H -
Sears Technician
May 20, 2013
A:

Oops! I left out a letter. Sorry about that. It's KEBC107KSS05.

Read More
Kirsten -
May 20, 2013
A:

Hi Kirsten; thanks for the model number correction. That model does have the temperature probe which would be my first suspect causing the heating issue. The probe will need to be ohmed out at room temperature (about 70 degrees F,.) it should read 1080 ohms. _Always disconnect power supply before servicing the appliance and when testing live voltage be sure to wear proper safety equipment (gloves and eye protection) also be aware of sharp metals on product_ If it is ok the thermal fuse would be the next thing to check it will shut the element down if it shows overheating, if it is defective and cutting elements off at normal temperatures, you will have to ohm it out after the oven shuts off. Last would be the main control. I hope this helps. If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services.

Read More
Ron H -
Sears Technician
May 20, 2013
A:

It was the probe. Took about three minutes to swap out the part and my oven works like a charm. Thank you so much for the help!

Read More
Kirsten -
May 29, 2013
A:

Way to go Krirsten, that's awesome, great work! You are welcome. Ron H.

Read More
Ron H -
Sears Technician
May 30, 2013
See more answers

Top Parts