Model #KEBC107KSS03 KITCHENAID Built-In Oven, Electric

  • Oven Parts
    3 Results
  • Oven Door Parts
    3 Results
  • Internal Oven Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Top Venting Parts, Optional Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kitchen Aid wall oven Baka won't bake after self-cleaning feature was used KEBC107KSS03 Kitchenaid Built-in oven - electric

A:


Hello glad to help.  Thank You for choosing Sears PartsDirect.com

I am sorry and do understand your frustration when the bake element isn't working after self cleaning.

Glad to help out.   Im  looking at your model number KEBC107KSS03.

Sorry for the problem but is a very common problem with the Kitchenaid ovens.  It means that the high limit thermostat on the back of the wall oven has gone bad.  To fix it  you will need to uninstall the unit and remove the back panel.  Then replace the high limit thermostat.  Here is the link you need to get it so please just click on and it will be ready to go.

High limit thermostat for model Kebc107kss03

If you have further questions please let me know.
Thanks for choosing Sears PartsDirect.com

Read More
Larry L -
Sears Technician
August 20, 2013
Q:

my electric convection oven was recently cleaned using the self-cleaning cycle. When this cycle ended,the electronic display comes up but oven wont work.

A:

All self cleaning ovens can sometimes play havoc with the unit due to the super high temperatures. I did some research and found a link to a situation very similar to yours. Review this data while you wait for an expert response from our team. This should take about a day or two. Until then, I hope this link is helpful and have a nice day.

Read More
Henry -
October 01, 2012
A:

I can understand how important it is to have issues with your oven. I recommend that you check the house circuit breakers or house fuses for the oven. There is a chance that one of the house fuses for the L2 leg of power is blown. The circuit breakers for the L1 and L2 legs of 240 volt power are normally connected together by a clip. If you have house circuit breakers for the oven, you can shut them off and then turn them back on. This may restore power to the oven on the L2 voltage side so that the elements will heat.

If that does not help, then you could have a blown thermal fuse on the back outside wall of that oven cavity. The L2 leg of voltage is traced in red to that thermal fuse. You can shut off the house circuit breakers for the oven (or remove the house fuses) and check that thermal fuse for continuity as shown in this Video . You should be able to access that fuse by pulling the oven out of the cabinet and removing the outside back panel. NOTE: That oven will be heavy. Two or more persons may be needed to safely pull that oven out of the cabinet . That power cord pigtail will limit the distance that you can pull that oven out of the cabinet. Depending on the height of the oven, you may be able to set it down on a chair or table just in front of the cabinet.

If that thermal fuse is blown, it will need to be replaced. You can order the part from this link: Sears Parts Direct . Be sure that you shut off the house circuit breaker for the oven before accessing and replacing that component.

If that thermal fuse is okay, then you could have a wiring failure or a problem with the control board that is causing this problem. If you don't feel comfortable doing this, just click on this link to schedule a service technician: Sears Home Services . I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
October 02, 2012
See more answers
Q:

My KitchenAid model-kebc107kss03 oven handle keeps coming loose.

A:

Having parts start to become loose on appliances is frustrating. While you are waiting on an expert to answer your question, I was searching your model number and found your owner's manual. I have attached the link below. Hope this helps!

Read More
Dezeray S -
February 15, 2011
A:

After researching the LOCTITE webpage, I found that technicians can use this product for tightening appliance hinges/locksets, ect. The website list several different adhesives that will work for any job you have. If this does not work for you, please resubmit your question with additional details.

Read More
Rgabriella02 -
Sears Technician
February 17, 2011
See more answers

Recommended maintenance parts & accessories

Show 3 more
No more item to show