Model #KDRP407HSS4 KITCHENAID Range, Electric/Gas

  • Oven/literature
    3 Results
  • Oven Door
    3 Results
  • Internal Oven
    3 Results
  • Control Panel
    3 Results
  • Top Venting
    3 Results
  • Cooktop
    3 Results
  • Burner Box And Manifold
    3 Results
  • Chassis
    3 Results
Find part by diagram >

Question and Answers

Q:

Oven won't heat Kitchenaid Dual Fuel Range KDRP407HSS4

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your oven does not work.

 
With the control powered down, check continuity across P4-1 or P4-2 (both are L1) and the following connections:

P5-1 for Broil element
P5-3 for Bake element
P5-4 for Convection element


OVEN SHUTDOWN THERMAL FUSE
The oven shutdown thermal fuse is located at the back of the oven.
It will shut down the elements if the temperature at the back of the oven exceeds component limits.
Verify that the oven shutdown thermal fuse is okay.
To replace this thermal fuse, refer to chart at right for
correct part number. 4451442 is the replacment part number. Opening temperature is  120°C+10°C to 120°C – 0°C.Closed Circuit.

Bake Element-P5-3 (R) to Output Side of Double Line Break Relay (Red Wire)- 25Ω  to 30Ω.

Broil Element-P5-1 (BU) to Output Side of Double Line Break Relay (Red Wire)- 45Ω  to 55Ω.

Oven Temperature Sensor- P7-4 (V) to P7-5 (V)- 1080Ω  @ 21C (70F).

If all these parts check out good, then it would be your control board that needs to be repalced. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the unit before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
August 16, 2015
Q:

How do I get a wiring diagram for a Kitchen Aid Range, model # kdrp407hss4?

A:

I'm sorry that you are having some difficulties. I did some research for you at managemylife.com and found the owners manual to this product. I also have attached a link to searspartsdirect which I think will really help you until your expert can respond. I have attached the link below. The link will go directly to your product of interest. I hope these links will help until your expert can respond.

Read More
James -
March 15, 2011
A:

Thank you for your question and I understand your concern.

Since your an experienced technician I added the complete technical data sheet in the images below. NOTE: Disconnect the range from the power source before servicing your range.

Read More
Joey S -
Sears Technician
March 16, 2011
See more answers

Top Parts